Collections in this community

• Exact Solutions for Piezoelectric Energy Harvesters Composed of Laminated Composite Substrates
• Temperature Rise at The Contact Between Sliding Surfaces with Micro and Nano Scale Roughness: Experiments and Analysis
• Fabrication, Characterization, and Modelling of SWCNT, MWCNT, and F-MWCNT Reinforced EMA Polymer Nanocomposites
• Stochastic Models in Design and Use of Machining Equipment
• Influence of Fuel Volatility on Dynamics and Thermodynamics of Spray Combustion in a Gas Turbine Combustor
• Studies on Multivariate Process Capability Indices Using Robust PCA and Computational Geometry
• Finite Element Analysis of Impact-Induced Deformations, Stresses and Damages in Composite Laminates
• Multi-Layered Structures of Highly-Filled Thermoplastic/Graphene Nanocomposites for Enhanced EMI Shielding
• Grindability Studies of Ceramics and Ceramic Matrix Composites
• Predictive Tools for Bead-Geometry, Cooling Rate, Micro-Porosity, Natural Frequency of Vibration and Residual Stress in Electron Beam Welded Stainless Steel Plates
• Fluid Dynamics in Three-dimensional Branching Networks with Application to Model Human Bronchial Tree
• Design Exploration of Underactuated Robotic Hands for Enveloping and Fingertip Grasps
• Effect of Pulsatile Flow and Air-Damper on Liquid-Liquid Two Phase Extraction Operations
• Flow and Heat Transfer over a Double Forward-Facing Step with Obstacles
• New Kinds of Sommerfeld Effect in Rotordynamic Systems with Non-Ideal Drive
• Exploration of Flashing in Stagnant Liquids and Analysis of Flashing Driven Natural Circulation Loops
• Mixing in a Tundish
• Transport and Thermodynamic Analysis of Micro Reactors
• Dynamics of Jet Pumps with Specific Reference to Hydraulic Transportation of Solids
• Role of Cryogenic Cooling on Machinability of Ti-6ai-4v Alloy
• Numerical Simulation of Two-Fluid Flows with Sharp Interfaces Using Level Set Method
• Vibration Analysis of Plates on Viscoelastic Foundations
• Non-Boussinesq Effects in Natural Convection of Power-Law Fluids
• Some On-Chip Applications of Alternating Current Electrothermal Flow
• Analysis of Air Entrainment and Exit Temperature Suppression of an Infrared Suppression (IRS) Device
• Some Aspects of Pressure Jet Combustion with Air Swirl
• Entrainment of Air into a Louvered Funnel
• Intelligent Computer-Aided Assembly Planning Methodologies for Mechanical Product Assembly Sequence Optimization and Robot Task Plan Generation
• Laser Beam Welding of NiTinol: Experimental Study, Modeling and Optimization using Nature-Inspired Techniques
• Solid Sintering of Copper and Copper-NaCl Mixture Using Friction Processing
• An Investigation on Residual Stress in Grit-Blasted Substrates and Plasma Sprayed Ceramic Coatings
• On Strategies and Decision Systems for Multi Sensor Based Tool Condition Monitoring in Face Milling
• Studies on Natural Convection Heat Transfer in Fluid Filled Saturated Anisotropic Rectangular Porous Slab
• Mixed-Mode Interlaminar Delamination Damage Evolution in Laminated FRP Composites
• Development of Heat Transfer Model for Parametric Studies on Laser Deposition of Metals with Powder Feed
• Analysis of Power System Transients Employing Wavelet Transform
• Study of Elastohydrodynamically Lubricated Rolling Element Bearings Considering the Effect of Surface Roughness and Micropolar Fluid
• Chemomechanics of Lithium-Ion Battery Anode Particles: Role of Geometry and Surface Effects
• Evolution of Microstructure and Texture and Numerical Simulation of Hot Deformation of 304LN Austenitic Stainless Steel
• Role of Counter Surface Topography on Wear of Polymers (A Semi-Analytical Model and Experimental Validation)
• Design and Development of Intelligent Optimization Algorithm
• Analysis of Non-Idealities of Interfacial Processes in Solid Oxide Fuel Cells and Lithium-Ion Batteries
• High Temperature Wear Characteristics of Laser Surface Remelted and Stellite/WC Composite Cladded H13 Steel
• Analytical Assessment of the Wetting Capability of MQL Supply and the Mechanism of Tool Wear in Micro-Milling
• On some Design Aspects of a Novel Wave Generating Cam for Conventional Harmonic Drives with Involute Toothed Gear Set
• Modelling and Dynamics of Epitrochoid Generated Orbital Rotary Piston LSHT Hydrostatic Motor and Transmission System
• Studies on Status of Global Foundry Industry and Development of a Framework for a Holonic Casting Manufacturing System
• Natural Convection and Radiative Heat Transfer from Helical Coils: Insights into Heat Transfer Dynamics
• Hydrodynamic Study of Granulation of Slag in Spinning Disc Atomization Using a Novel Air Blast Method
• Development and Application of a High-Order Accurate Meshless Method to Thermo-Fluid Problems in Complex Geometries
• Dynamical Modelling of Electrical Assets for Real-Time Fault Diagnosis and Data-Driven Prognosis
• Detection, Localization and Classification of Certain Rail Track Defects from Axle-Box Acceleration Measurements
• Automatic Determination of the Neutral Curve of Linear Stability of Steady and Time-Periodic Flows Using Pseudo-Arclength Continuation
• Dynamics of Parametrically Excited Micro-Cantilever Beam-Type Mass Sensor
• Acoustical Study of Periodic and Gradient Based Sonic Crystals Based On Rigid and Cladded Resonators
• Modeling, Simulation and Control of a Solid Oxide Fuel Cell System : a Bond Graph Approach
• On Strategies and Decision Systems for Multi Sensor Based Tool Condition Monitoring in Face Milling
• Thermomechanical Finite Element Analyses and Experimental Investigations on Angular Distortions and Weldment Characteristics of Arc Welded Joints
• Improvements in Chemo-Mechanical Modelling of Lithium-Ion Battery Anode Particles: Interfaces, Non-Axisymmetric Growth, and Instability
• Improved Micromechanical Modelling by Incorporation of Varying Stresses in Individual Inclusions within Mean-Field Homogenization Framework
• Analysis of Smart Constrained Layer Damping of Laminated Composite Structures Using Mesh free Method
• Monitoring and Analysis of Mechanical as Well as Laser Forming of Metal Foams
• New Approaches in Data-Driven Structural Health Monitoring
• Investigations on Buoyancy Induced Circulation Loops
• Three-Dimensional Finite Element Analysis of Heat Transfer in Arc Welding
• Design and Analysis of a Flexure-Based 6-Dof Compliant Parallel Micromanipulator
• Performance Evaluation of Railway Vehicles with Worn Wheels
• Hematology on a Compact Disc via Interplay of Rotational and Capillarity-Driven Interactions
• Effects of Dilution on the Combustion and Emission Characteristics of Kerosene Fuel
• Analysis of Unique Transport Processes in Magneto-Fluidic Systems Using Continuum-Based and Particle-Based Approaches
• Heat Transfer in Presence of Electro Magneto Hydrodynamic Interactions in Narrow Confinements
• Steady State and Dynamic Behaviour of Lubricated Roller Bearings
• Laser-Based Additive Manufacturing of Graded Porous Implant and Surface Modification of Ti6Al4V for Improvement of Biofunctionalities
• Improving the Titanium and Stainless Steel Similar and Dissimilar Welding by Nonconventional Energy Sources and Processes
• Burr Formation in Micro-Machining and Ultrasonic-Assisted Abrasive Micro-Deburring
• High Speed Grinding of Ti-6Al-4V Using Electroplated cBN Wheel
• Heat Transfer, Emission Characteristics, and Thermodynamic Exergy Balance of Impinging Flames on Plane and Curved Surfaces
• Analysis of Externally Pressurized Air Journal Bearings
• Theoretical Investigations on the Effect of Velocity Slip on Steady State Performance of Externally Pressurized Porous
• Evaluation of CO2 Based Sub- and Transcritical Refrigeration Systems for Air-Conditioning Applications
• Multiscale Characterization and Modeling of 3D Printed Short Fiber Reinforced Thermoplastic Polymer Composites
• Wave Propagation in Elastic and Viscoelastic Media with Frictional and Imperfect Interfaces
• Studies on a CO2 Based Summer Air Conditioning System with Single and Multiple Expansion Valves
• Smart Damping of Geometrically Nonlinear Vibrations of Omposite Plates and Shells Using Fractional Derivative Constitutive Model of Viscoelasticity
• Conjugate Natural Convection from Horizontal and Vertical Thick Hollow Cylinder
• Some Studies on Laser Transformation Hardening
• Flow Instabilities Inside a Nozzle
• Stability Analysis of Long Hydrodynamic Journal Bearing of Circular Cross-Section Lubricated with Magnetomicropolar Fluid
• Investigation of Solid Lubricious Coatings Deposited by Laser and In-House Developed Laser Assisted Cold Spray Setup
• Failure Analysis and Stress Distribution in Tailored Lap Joints: A Computational and Experimental Study
• Fabrication of Micro End Mill Tools Using Sequential EDM Process and Its Performance Analysis
• Studies on Transcritical CO2 Based Cooling and Heating Systems with Ejector
• Model–Based Fault Diagnosis and Prognosis of Hybrid Dynamical Systems
• Numerical Studies on Complex Solidification Andmelting Systems with Low Prandtl Number
• Sommerfeld Effect in Motor-Driven Machines and Mechanisms
• Dynamics of Electrically Stressed Drops: Deformations, Migrations and Interactions
• Studies on Compression-Absorption Systems for Heating and Cooling Applications
• Dynamics of Cellular Suspensions in Bioengineered Microfluidic Confinements: Perspectives from Physiology-On-Chip to On-Chip Medical Diagnostics
• Enhancing Defrost Efficiency in Domestic Refrigerators: Integration of Natural Circulation Loops and Heat Transfer Optimization
• Online Monitoring of Thermal Signal and Its Application in Feedback Control during Laser Cladding and Laser Additive Manufacturing Processes
• Investigation into the Acoustics of Microperforated Panel Absorbers
• Modelling of Curing of Fibre Reinforced Composite with Porosity Defects and Experimental Validation
• Pulsatile Flow Features in Model Aortic Conduits in Presence of Mechanical Heart Valves
• Resistance Spot Welding of Similar and Dissimilar Sheet Materials with Carbonaceous Interlayers
• Development and Characterization of Functional Coatings over Metallic Implant Surfaces for Improved Bio-functionalities
• Laser Remelting of Thermally Sprayed Alumina and Chromia Coatings
• Parametric Optimization and Weld Zone Characterization of Fiber Laser Welded SS304 and SS316 Sheets of Sub-Millimeter Thickness
• Numerical Investigations on Enhancement of Pool Boiling Heat Transfer Employing Lattice Boltzmann Method (LBM)
• Natural Convection Heat Transfer from Branching Fins
• Vibrations of Rotating Pretwisted and Tapered Blades
• A Numerical Investigation on Spray, Combustion, and Emission Characterization of Direct and Port-Injected Dimethyl Ether-Fueled Compression Ignition Engines
• An Experimental Study and Molecular Dynamic Simulation of Friction Stir Spot Welding of Aluminum and Copper for Battery Pack Applications
• Some Aspects of Swirl Spray Atomizing Nozzles
• Wear Modelling of 90 Degree Bed Conveying Air-Solid Mixture: Under Interference Conditions Due to Connecting End Pipes
• Forming and Crushing Performance of Laser Welded Tailored Blanks of Extra Deep Drawing Steel Sheets
• Inflation and Stability of a Flat Hyperelastic Toroidal Membrane Structure
• Surface Tension Gradient-Driven Dynamics of Droplets in an Incipient Flow
• Natural Convection Cooling of Infrared Suppression (IRS) Devices
• Failure and Formability Analyses of Pre-Strained Anisotropic Thin Sheets
• Thermo-Capillarity Induced Transport Phenomena in Microfluidic Domains
• Formation and Evolution of Liquid Droplets and Direct Contact Condensation of Vapour Bubbles in an Immiscible Liquid
• Stresses around Free and Pin-Loaded Holes in Filamentary Composites Laminates
• Prediction of Load and Metal Flow in Axisymmetric Extrusion Forging
• Electro-Mechanics of Complex Matter – From Dilute Polymers to Human Body Fluids
• Mechanics of Fluid-Filled Elastomers for Periodic and Random Microstructures with Aligned Circular Pores
• Integrated Thermo-Mechanical and Metallurgical Model of Friction Stir Welding of Pipes
• Forming Behavior of Solution Treated Inconel-718 Sheets at Room and Elevated Temperatures for Aerospace Applications
• Formability of Ultra-Thin Sheets and Fabrication of Serpentine Shaped Micro-Channels by Stamping and Hydroforming Processes for Battery Applications
• Optimized Time Delay-Based Sound Source Localization Method for Impulsive Sources
• Numerical Study of Hemodynamics in Healthy and Diseased Arteries under Different Physiological Conditions
• Role of Tailored Residual Stress on Control of Burr Formation in Micro End Milling: Experiments and Numerical Modelling
• Investigations on Thin Film Evaporation and Boiling in Microchannels Pertaining to Miniature Heat Dissipating Devices
• Analyses of Substrate-Mediated Nucleation and Experiments on Subsequent Surface Icing
• Static and Dynamic Mechanical and Corrosion Properties of Powder-Bed Laser-Fused Precipitation Hardening Stainless Steel
• Numerical and Experimental Studies on Natural Circulation Loops Based on Supercritical Carbon Dioxide
• Warm Forming of Aluminium Alloy Sheets and Formability Improvement in Nonisothermal Redrawing Process
• Experimental Studies on Entrainment at Liquid-Liquid Interface Due to the Movement of a Third Phase
• Sommerfeld Effect Characterisation in Complex Rotor Dynamic Systems with Non-Ideal Drive Through Semi-Analytical Methods
• Large Eddy Simulation of Incompressible Turbulent Planar Single and Parallel Jets
• Experimental Study on Alumina and Iron Oxide Nano Fluids in Natural Convection Cavity With and Without Rotary Magnetic Field
• Theoretical and Experimental Study of Influence Function in Magnetorheological Fluid-Based Finishing of Oxygen-Free High Conductivity (OFHC) Copper
• Natural Convection Heat Transfer from a Horizontal, Vertical, Solid or Hollow Cylinder: A Numerical Approach
• Thermoelastic Analyses of Interlaminar Delamination Growth Behaviour Emanating from Free and Pin-Loaded Holes in Laminated Frp Composites
• Analytical Modeling of Transport Processes in Non-Newtonian Sisko Fluids and Third Grade Fluids
• Numerical Investigations on Transport Phenomena in Thin Vapour Chambers for Electronics Cooling
• Analysis of Elastic and Coupled Flexo-Physics Problems using Generalized Strain Gradient Theories
• Manipulation of Droplets by Electrostatic Actuation and the Related Hydrodynamics
• Lathe Rigidity and Machining Accuracy
• Dynamic Behaviour of Shape Memory Alloy Oscillator under Harmonic Excitation
• Underwater Acoustic Source Identification and Localization in a Reverberant Environment
• Preparation and Characterisation of Thermally Sprayed Diamond Reinforced Bronze and Molybdenum Coatings
• Estimation of External Forces in Dynamic Systems Using Deterministic-Stochastic Techniques
• Uniaxial Tensile Strength and Susceptibility to Intergranular Corrosion of Hastelloy C-276 Sheets Welded by Ytterbium-Fiber Laser Beam and Electron Beam
• Development of Friction Based Solid State Processing Strategies for the Surface Modification of Aluminium Alloys
• Friction Stir Lap Welding of AA6061-T6 and AISI304 in Air and Underwater Media: Mechanical Studies and Material Characterizations
• Dynamic Evolution of Gas-Liquid Interfaces During Bubble Bursting, Bubble Coalescence and Entrainment at the Free Surface By Rotary Rollers
• Electrically Modulated Dynamics of Suspended Drops and Emulsions
• Microfluidic Transport and Complex Interfaces: Perspectives of Drops and Lipid Vesicles
• Experimental Investigation on Electrochemical Micromachining of Nitinol Shape Memory Alloy
• Microstructure and Formability Analyses of Tailor Welded Blanks of Commercially Pure Titanium and Ti6al4v Alloy Sheets
• On the Surface Micro-Mechanical Properties of Polymers
• Metro Coach Dynamics Study Using Field Trials and Simulations towards Improving Ride Quality and Safety
• Monitoring of Molten Pool Thermal History and Its Significance in Laser Cladding of Inconel718 Based Composite Coatings
• Electrokinetics in Randomly Interconnected Porous Matrix and Its Perspective in Microfluidic Applications
• Wave-Induced Transport of a Particle on a Flexible Surface
• Transport of Complex Fluids through Micro Confinements
• Ultra-High Finishing of HVOF Sprayed WC-Co Coating
• An Inquest into Inter-Chamber Leakage through Ideally form-Closed Contacts between Star and Ring in GEROTOR Pump and ORBIT Motor
• Natural Planar Hydraulic Jumps in Laminar and Turbulent Flow: Theoretical, Numerical and Experimental Study
• Modelling and Control of a Pneumatically Actuated Continuum Manipulator under the Effect of Hysteresis
• Atmospheric Plasma Sprayed Metal Oxide Coatings: Understanding on their Sensing and Catalytic Conversion Characteristics of Toxic Gases Relevant to Air Quality Monitoring
• Electrically Modulated Interfacial Dynamics: Perspectives from Inert Droplets to Active Microswimmers
• Coupled Dynamics of Pantograph-Catenary System during Multiple Pantograph Operation
• Instabilities in Rotationally Actuated Micro-Scale Flows
• Development of Closed Loop Pulsating Heat Pipes for Application at Elevated Evaporator Temperature
• Composite Coatings of Carbonaceous Nanomaterials on Aluminium Substrates by Solid State Processing
• Numerical and Experimental Investigation of Buoyancy Induced Convection in High Porosity Media
• Fabrication of Longitudinal Friction Stir Welded Aluminium Tubes: Evaluation of Formability and Crushing Performance
• Data-Driven Diagnosis and Prognosis of Faults in Rotating Machinery
• Multi-Objective Optimization of Electrochemical Micro-Drilling of Ti6Al4V Using in Situ-Fabricated High Aspect Ratio WC Micro-Tool
• Parallel Sliding Lubricated Contact with Positive Deterministic Surface Textures
• Gas-Solid Two-Phase Flow in Sudden Expansion Pipes, Diffusers and Orifices- A Computational Study
• Wave Induced Transport of Particles and Extended Bodies
• Fabrication of Flexible Abrasive Tools and Their Performance Evaluation for Finishing Different Materials
• Static and Dynamic Behaviour of Piezoelectric Structures in Presence of Crack
• Laser Additive Manufacturing of Friction Stir Welding Tools for High-Temperature Materials and Laser Shock Peening for Improving Weld Quality
• Electrohydrodynamics of Droplets in Confined Fluidic Environment
• Bone Ingrowth and Remodelling Around a Porous-Coated Femoral Implant
• Large Eddy Simulation of Incompressible Turbulent Flow Inside Lid-Driven Cavity
• Surface Modification With Powder Metallurgy (P/M) Electrodes In Electrodicharge Machine
• Modeling and Dynamics of Railway Vehicles: A Bond Graph Approach
• Modelling of Moulding Sand Systems Using Conventional Regression Tools and Neural Network-Based Approaches
• On Some Aspects of Room Airflow Simulations
• Some Studies on Multi-Phase Transport Phenomena in Multi-Component Alloy Solidification Processes
• Study on Different Strategies for Soft Computing-based Drill Wear Monitoring using Multiple Sensors
• Some Studies on Parametric Instability and Control of Composite...
• High Efficiency Deep Grinding of Bearing Steel and Modelling for Specific Energy Requirement
• Circulation Flow And Mixing In Rh Degasser
• Design and Development of Adaptive Motion Planners for Wheeled Robots
• Development of High Performance Titanium Nitride Coated Carbide Inserts Using Closedfield Unbalanced Magnetron Sputtering
• Natural Philosophy of Thermodynamic Optimization
• New Conservation Integrals For Circular Arc Crack And Computational Verifications
• Two Phase Flow Pressure Drops in Sudden Contractions and Expansions
• Model Based Fault Diagnosis of a Rotor System for Unbalance, Misalignment and Crack
• Development and Machining Performance of Titanium Nitride-Molybdenum Disulphide Composite Coated Tools...
• Design and Control of a Piezoelectric Actuated Bio-inspired Compliant Robotic Microgripper
• Carbon dioxide based natural circulation loops: Application to refrigeration and air conditioning systems
• Natural, Forced, and Phase-Change Convective Transport in Microchannels
• Heat Transfer Model for Laser Cladding with Powder Feed
• Some Studies in Metal Forming with Underwater Explosion Bubbles
• On The Mechanics of Stick Slip Motion and It's Elimination
• Multi-Sensor based Monitoring and Modeling of Pulsed GMAW Process
• Development of Aluminium Oxide-Titanium Boride-Titanium Nitride Composite Coating...
• Characterization and Performance Evaluation of Ceramic Composite Coatings Synthesized by Laser Cladding...
• Experimental Investigations and Input-Output Modeling of Electron Beam Welding Process...
• Adhesion Failure and Delamination of Bonded Tubular Joints Made with Laminated FRP Composites and Functionally Graded Materials
• Sommerfeld Effect in Internally Damped Shaftrotor Systems
• Modeling and Simulations of Six-legged Walking Robots: Analytical and Soft Computing-based Approaches
• Convection and Centrifugal Instability
• Creep Analysis of Cr-Mo-W-V Steels and their Components
• Machinery Signature Analysis using Hilbert Huang Transform
• Bond Graph Aided Trajectory Tracking and Impedance Control of Parallel Manipulators
• Design, Development, Fabrication and Performance Evaluation of a Micro-Electrochemical Machine
• Characteristics of Single-Phase and Two-Phase Natural Circulation Loops – Experiments and Analyses
• Development of Aluminium Based Metal Matrix Composites by Direct Metal Laser Sintering Technique and Their Characterisation
• Interfacial Transport in Rotationally Actuated Microfluidic Devices
• Studies on Total Quality Management in Indian Manufacturing Firms
• Synergy of CFD, experimentation and soft computing techniques for modelling, optimization...
• Forward and Reverse Modeling of Plasma Spray Coating Process: Experimental Observations, Statistical Analyses...
• Finite Element Modeling of Chip Formation during Orthogonal Machining
• Laminar Forced Convection with Viscous Dissipation in Hydrodynamically and Thermally
• Modeling and Simulations of Robotic Systems Using Soft Computing
• Numerical and Experimental Studies on Subcritical/Supercritical Carbon Dioxide Based Natural Circulation Loops
• Laminar Forced Convection with Viscous Dissipation in the Entrance Region of Annuli Subjected to Constant Temperature
• Micromechanical Analysis of Novel Continuous and Short Fuzzy Fiber Reinforced Composites
• Studies on Two-Phase Flow Phenomenon in Subsonic Aerothermopressor Coupled to Gas Turbine
• A Numerical Model and Experimental Investigations for Laser Drilling Process
• Laminar Slot Jet and Slot Jet Impingement Heat Transfer
• Some Vibration Problems in Machine Tools
• Some Studies in Stress Distribution in Pressure Vessels and in Gear Teeth
• Fluid Flow and Heat Transfer by Impinging Jets
• Statistical and Economic Designs of Multiple Stream Process Control Charts
• Performance Characteristics of Plain and Porous Metal Journal Bearings in Turbulent Regime
• Studies on Long Term Average Optical Efficiency for Principal Solar Collectors and Shading Factors for Windows
• Thermal-Hydraulic Phenomena in Laser-Material Interactions
• Some Aspects of Pressure Atomizing Nozzles
• Studies on Axial and Fin Heat Transfer in Circulating Fluidized Beds
• Prediction by the Finite Element Method and Experimental Verification of the Temperature Histories in the Submerged Arc Welding
• Theoretical Analysis of Conical Whirl Instability of Unloaded Porous Journal Bearings Including the Effect of Velocity Slip
• Fluid Flow and Heat Transfer by Slot Jet Impingement on Two-Dimensional Bodies
• Turbomachine Blade Vibration
• Dynamic Analysis of Mechanisms Containing Flexible Links
• Some Investigation on Externally Pressurized Flexible Circular Thrust Bearing
• Finite Element Analysis of Corner Joint in Framed Structures
• Some Analytical Studies of Series Production Systems with Variable Operative Times
• Gas-Solid Flows in Pipes and Jets: A Computational Investigation
• Electron beam welding of similar, dissimilar and reactive metals:Experimental studies,modeling and analysis
• Biomechanical Analyses of the Pelvic Bone and Optimal Design Considerations for Uncemented Acetabular Prosthesis
• Numerical Simulation of Turbulent jet Flow Over Oblique Wall
• Vibration and Noise Generated by Ball Bearing
• Metal Transfer in Arc Welding with Coated Electrodes
• Effect of Pulsation and Swirl on Combustion in Fuel Beds
• Some Aspects of Evaporation and Condensation over Small Scales
• Inflation Mechanics and Dynamics of a Hyperelastic Toroidal Membrane
• Condition Monitoring of Submersible Pump Using Motor Current Signature Analysis
• Studies on Friction Stir Welding of Naturally Aged 6063 Aluminium Alloy
• Simulation of Flow and Heat Transfer in Non-Newtonian Fluids Inside Cavities by Lattice Boltzmann Method
• Studies on Ammonia Based Solid Sorption Refrigeration Systems
• Hydrodynamic Lubrication in Parallel Sliding Textured Surfaces (with inertia, slip and turbulence effects)
• Balancing of Flexible Rotors
• Stress Analysis of Some Welded Joints
• Design of Multivariate Statistical Process Control Chart with Statistical and Economic Approaches
• Finite Element Analysis of Heat Conduction and Thermal Stresses in Laminated Composite Plates
• An Investigation of a Surge Cycle
• Analysis and Synthesis of Sheet Metal Forming by Laser Heating Using Finite Element Method and Soft Computing
• Modal Damping Prediction for Vibrating Solids: Constitutive Models and Finite Element Computations
• Analysis of Composite Plates with Distributed Piezoelectric Sensor and Actuator Layers
• Economic Design of Attribute Control Charts for Multistage Production Systems
• Robust Control of Nonholonomic Systems With Multi-Sensor Fusion Data
• Processing and Characterization of Mullite Coating Obtained by Plasma Spraying of Zircon-Alumina Powder Mixture
• Study of Incompressible Turbulent Flow inside Lid-Driven Cavities using Large Eddy Simulation
• Dynamic Behaviour of Externally Pressurised Multi Recess Oil Journal Bearings
• A Study on Dynamic Behaviour of Hydraulic Servomotor with Asymmetric Actuator
• Numerical Simulation of Room Airflow
• Economic Design of X Control Charts with Uncertainty in Cost and Process Parameters Using a Risk Minimization Approach
• Stiffness and Damping Characteristics of Externally Pressure of Externally Pressurised Porous Gas Journal Bearings
• Stability of Nonuniform Cantilever Beams Subjected to Nonconservative Forces
• Stress Corrosion Studies on Alpha-brass and Copper Maganese Alloys
• Static and Dynamic Characteristics of Finite Porous Oil Journal Bearings Considering Tangential Velocity Slip
• Dynamic and Jump Characteristics of Cam-Follower Systems
• Residual Stresses in Welding: Some Experimental and Numerical Studies
• Electrically Modulated Contact Line Dynamics of Immiscible Binary Fluids
• Effect of Taper on Uncoupled Natural Frequencies of Cantilever Beams
• Longitudinal Vibration of Stepped Bars
• Multi-Scale and Multi-Phase Transport in Microfluidic Systems
• Extension of Lagrangian-Hamiltonian Mechanics, Study of Symmetries and Invariants
• Theoretical Studies on Metal Hydride Based Systems for Hydrogen Storage and Water Pumping
• Development of Multi-Component Composite Coating on Ti-6Al-4V Substrate ...
• Grindability Study of Inconel 718 Using Galvanically Bonded Monolayer Cbn Wheel
• Thermal Comfort and Comfort Standards for Naturally Ventilated Classrooms in Hot Humid Climates
• Investigations on Nanofluid Based Thermal Engineering and Magneto-Rheological Applications
• Computational Study of wall-Bounded Flow and Heat Transfer Using Low-Reynolds Number Turbulence models
• Analytical and Numerical Models for Vibro-Acoustic Studies of Thin Isotropic Rectangular and Circular Cracked Plates
• Analysis of Active Contacts in Epitrochoid Generated Form Closed Rotor-Stator set with specific reference to Hydrostatic...
• Fabrication and Performance Evaluation of on-Chip Micro Heat Pipe
• Signal Processing Techniques on Rotary Optical Encoders for Fault Detection in Rotating Machines
• Tool Condition Monitoring Using Digital Image Processing
• Active Control of Geometrically Nonlinear Vibrations of Magneto-Electro-Elastic Plates and Shells
• Vibration Isolation Using Magneto-Rheological Fluid Based Dampers
• Studies on Inventory, Maintenance and Joint Inventory-Maintenance Models Using Non-Traditional ptimization Tools
• Formability Analysis of Laser Welded Dual Phase Steel Sheets for Auto-Body Applications
• Thermal Simulation Studies and Grain Growth Modelling of the Weld-Haz in Hsla-80/100 Steels
• On Development and Performance Evaluation of Advanced Single Layer Brazed Cbn Wheel
• Active control of geometrically nonlinear vibrations of smart laminated composite, functionally graded and fuzzy fiber...
• Active Control of Geometrically Nonlinear Vibrations of Smart Skew Laminated Composite, Functionally Graded and Fuzzy Fiber...
• Active Vibration Control of Flexible Rotors with Electromagnetic Actuator
• Development and Validation of Soft Computing Based Models for Pulsed Gas...
• Effect of Stress-Softening on the Dynamics of Rubber Strings
• Gait Generation of Dynamically Balanced Biped Robots Using Soft Computing
• Improvement in the Machinability of Ti-6al-4v Titanium Alloy by High Pressure Cooling
• Microstructural and Tribological Study of Nanostructured and Conventional Thermally Sprayed Ceramic Coatings
• Modeling and Multi-Objective Optimization in Wire Electro-Discharge Machining of Composite Materials
• Unknown Input State Estimators for Component Fault Detection and Isolation of Lumped Parameter Systems
• Theoretical Studies of Electrokinetic Transport and Separation in Nanofluidic Channels
• Nonlinear Analysis of Smart Isotropic and Orthotropic Functionally Graded Plates Using 1-3 Piezoelectric Composites
• Performance of Vertically/Obliquely Reinforced 1-3 Piezoelectric Composites...
• Studies on Modeling of Bead Geometric Parameters in Welding...
• Theoretical Studies on Pneumatic and Whirl Instability of Externally Pressurized Porous Gas Bearings Considering Velocity Slip
• On the Mechanics of Thread Rolling
• Effect of Pulsation and Swirl on Pulverized Coal Combustion
• Effect of Non-Newtonian Lubricant on Stability of Journal Bearings
• Analysis of FRP Laminated Composites with Internal Flaws
• Fluid Flow and Heat Transfer by Slot Jet Impingement on Triangular and Hexagonal Prisms
• Studies on Influence of Fluid Density Variation and Non-Darcy Flow on Natural Convection in a Porous Box
• Numerical Modelling of Fluid Flow and Heat Transfer During Czochralski Crystal Growth
• Processing and Characterisation of Plasma Sprayed Ceramic Coatings on Steel Substrate
• Analysis of Piezoelectric Fiber Reinforced Composite Materials for Distributed Actuators of Smart Composite Structures
• Fluid Flow and Heat Transfer in Rod Cluster Sub-Channels
• Experimental and Numerical Analyses of Bent Angle Modification and Three Dimensional Surface Generation by Laser Forming
• Shape Optimization of Cementless Femoral Implant using Genetic Algorithms
• Finite Element Modeling of Delamination During Drilling of Fibre Reinforced Plastic Composites
• Fluid Flow and Conjugate Heat Transfer for a Combined Turbulent wall Jet and Offset Jet
• Entrainment of Air into an Infrared Suppression Device
• Locomotive Wheel Failure from Excessive Wheel Gauge Change
• Fluid Flowand Conjugate Heat Transfer in a Turbulent Slot Impinging Jet
• Dynamical Aspects of Water Transport in Nanofluidic Channels
• A Study on the Effect of Surface Roughness on the Temperature Rise at the Contact between Sliding Bodies
• Some Studies on Underwater Shielded Metal ARC Welding
• Vibration of Turbine Blades
• Combustion Studies in a Cold Blast Cupola
• Some Heat Transfer and Thermodynamic studies of combined Cycle Power Generation
• Modeling and Diagnosis of Rolling Element Bearing Faults in Special Operating Conditions
• Some Studies On Zircon Sands for Foundry Applications
• Interfacial Dynamics of Thin Liquid-Films in Free-Surface Flows
• Heat and Mass Transfer Studies on Adsorbed Natural Gas Storage Systems
• Multi-Sensor Based Tool Condition Monitoring in Drilling of Glass Fibre Reinforced Plastic
• Active Constrained Layer Damping of Geometrically Nonlinear Vibrations of Smart Laminated...
• Multisensor Measurements and Data Fusion in Inverse Heat Transfer and Multiphase Flow
• An Investigation on Water-Jet Assisted Underwater Laser Cutting Process
• On Damping of Thin Cantilevers
• Burnout Time in Fluidized Coal Bed Combustion
• Electrokinetics Over Charge Modulated Surfaces
• Effects of Friction on Vibration of Gear Transmission Systems
• Natural and Mixed Convection Heat Transfer from Spheres and Vertical Cylinders
• Electrically Modulated Wetting and Dynamics of Sessile Liquid Drops
• Steady State and Dynamic Modeling of an Automotive Air Conditioning System under Healthy and Faulty Conditions
• On the Contact Problem of an Inflated Spherical Nonlinear Membrane
• Untitled
• Effect of Water-Jet on Quality Improvement of Various Laser Material Processing Modalities
• Some Studies on Distortion in Welding
• Simulation Studies on Formation of Nitric Oxide inside the Cylinder with Gasoline and Gasoline-Water Mixtures
• Hydrodynamics of Swirl Spray Pressure Atomizers and Thermal-dynamics of Gas Turbine Combustion
• Structured Approach to Stochastical System Dynamics
• Static and Fatigue Analyses of Fillet and Butt Welded Joints with Undercut Defects
• Heat Transfer from Rotating Short Radial Blades
• Performancean Alysis and Optimization of Individual Fins and Fin Assemblies
• Computer Aided Analysis of Some Axisymmetric Simple and Compound Extrusion Problems
• Effect of Specimen Geometry on Plastic Zone Size
• Contact Stresses and Wear Characteristics of Total Artificial Hip Joint Using Polymeric and Composite Acetabular Cups
• Transcritical Carbon Dioxide Heat Pumps for Simultaneous Cooling and Heating
• Analysis of Stresses and Deformations in Beams of Composites
• Combined Heat Transfer and Mass Transfer in a Sorbent Sphere
• Study on the Performance and Emission Characteristics of Spark Ignition Engine Using Gasoline/Ethanol Blends with Surge Chamber
• Some Studies on Synthesis and Characterisation of In-situ Al-TiC Metal Matrix Composites
• Vision Based Monitoring and Feedback Control Systems for ARC Welding Process
• Study of Some Aspects of Machinability
• Gauge Widening Failure of Tread-Braked Passenger Coach Wheel Sets: Finite Element Modeling and Field Observations
• Multicomponent In-Situ And Ex-Situ Laser Coatings on Ti-6al-4v and Al Substrates...
• Real-World Chaotic Systems Using Computational Intelligence Approach
• Finite Element Modeling and Experimental Investigation of Arc Welding
• Torsional Vibration Model and Motor Current Signal Based Fault Detection Technique for Multi-Stage Helical Gearbox
• On Nucleation and Growth of HFCVD Diamond Coating on Cemented Carbide Inserts and its Performance in Machining
• Studies on Squeeze Film Stabilization of Rotor-Bearing Systems Using Newtonian and Viscoelastic Lubricants
• Studies on Some Aspects of Electro-Discharge Machining
• Theoretical Md experimental investigations on cyclone separator
• Parameter identification in multidegree vibrating systems
• Dynamics of pneumatic conveying
• Numerical Studies on the Dynamics of Complex Fluids in Narrow Confinements
• Natural Convection Heat Transfer from Horizontal and Vertical Cylinder with Annular Fins
• Investigations into the Movement of Materials on Vibratory Spiral Elevator
• Design of Optimum Support Characteristic for Rotor Shaft Systems
• Studies on Hourly and Daily Cumulative Frequency Distributions for Ambient Temperature,Clearness...
• Effect of Solids on Centrifugal Pump Characteristics
• Some Studies on Material Removal Rate in Abrasive Jet Machining
• Inverse Acoustical Characterization of Jute Materials and their Application in Microperforated Based Multilayer Sound Absorbers
• Fluid Flow and Heat Transfer from Bluff Bodies of Various Shapes Placed Inside a Wind Tunnel
• Development and Performance of Brazed Type Monolayer cBN Wheel
• Modelling and Simulation of Centreless Grinding of Antifriction Bearing Elements
• Stability of Rotor-Bearing Systems under Non-Potential Forces : a New Perspective
• Studies on Dynamics and Control of Flexible Rotors Supported with Active Magnetic Bearings
• The Influence of Mechanical, Thermal and Surface Properties on the Friction and Wear of Polymers - Experiments and Analysis.
• Studies on Optimal Tolerances and Process Variabilities
• Dynamic Characteristics of Aerostatic Rectangular Thrust Bearings
• Analysis of Externally Pressurized Oil-Lubricated Multirecess Annular Thrust Bearings
• A Hybrid Computational Intelligent Systems Approach for Modelling, Control and Optimization of Large Scale Industrial Processes
• Damping at Preloaded Metallic Interfaces Subjected to Cyclic Tangential Loads
• Heat Transfer By Impinging Jets
• Development and Machining Performance of Titanium Nitride-Tungsten Disulphide Composite Coating Using Pulsed...
• Development and Performance Evaluation of CVD Diamond Coated Carbide Tools
• Dynamic Analysis of a Rotor System for Detection of Crack and Coupling Misalignment
• On Improvement in Machinability of Hss Drills by Chisel Edge Modification
• Static Load Sharing by Tooth Pairs in Involute Internal‐External Gear Set‐ with specific reference to Strain Wave Gearing
• Bone Ingrowth and Remodelling Around Porous Coated Acetabular Prosthesis:a Mechanobiology Based Finite Element Analysis
• Some Thermodynamic and Experimental Studies Related to Clean Coal Technology
• Some Aspects of Phase Change Modeling Materials Processing
• Studies on Some Aspects of Electrochemical Grinding
• Accommodation and Force Control in Tracking and Manipulation through Virtual Dissipative Degrees of Freedom
• Studies on Strategies for Online Learning for Averting Crisis in Vehicles
• Coupled Displacement Field Finite Element Models for Laminated Composite Structures
• Design, Development and Performance Studies on an Improved Virtual Impactor Type Aerosol Generation System
• Experimental and Numerical Studies on Laser Transformation Hardening
• Experimental and Theoretical Studies on Ion-Exchanged X-Zeolites as Catalysts for SI Engine Emission Control
• Electrohydrodynamic Mass Transfer of Electrolytes in Poiseuille Passages
• Robust 3-D Shape Extraction by Integrating Photometric and Motion Stereos through Modular Neural Networks
• Dense Granular Flow through Silos Closed Channels and Open Channels
• Friction Stir Welding and Deep Drawing of Aluminum Tailored Blanks for Light Weight Automotive Applications
• Fluid Mechanics and Performance Optimization of Tesla Disc Turbines
• Experimental Investigation on Air Entrainment by Plunging Liquid Jets and its Application in Hydraulic Air Compressor
• Analysis and Performance Studies of some Equipment with Combined Sensible and Latent Heat Transfer
• Studies on Orbital Rotory Piston ‘Lsht’ Hydrostatic Motor Low Speed Performance and Design
• Effect of Fluid Inertia on Stability of Fluid Film Bearings
• Analysis of Stresses and Deformations in Nuclear Fuel Pellets
• Some Studies with Limestone and Laterite in a Rotary Kiln
• Study of Static and Dynamic Characteristics of Sandwich Beams Under Various Boundary Conditions
• On the Mechanics of Axisymmetric Extrusion-Forging
• Property Improvement of Thermally Sprayed Coatings Using Carbon Nanotube Reinforcement
• Development of Arc Rotation Mechanism and Experimental Studies on Pulsed GMA Welding with and without Arc Rotation
• Transcritical Carbon Dioxide Heat Pumps: Studies on Multistaging and Capillary Tube Systems
• Analysis of Rough Surface Hydrodynamic Bearings using Stochastic Finite Element Method
• Studies on Natural Convection During Melting and Solidification of Metals and Alloys
• Some Studies of Radial Extrusion
• Some Stability Problems in Hydrodynamics and Hydromagnetics
• Studies on Simulated HAZ Conditions in a Structural Steel
• Computer Aided Analysis of Hydraulic Press Structures
• Fluid Flow and Heat Transfer by Slot Jet Impingement on Square and Rectangular Cylinders
• Analysis of Externally Pressurized Two-Layered Porous Journal Bearings
• Bond Graph Based Analysis of Dynamic Systems Through Substructuring
• Novel Twin Tool Based Friction Stir Welding of Aluminium Alloys
• Dynamics of Rotor Bearing Systems as Influenced by Dilute Viscoelastic Lubricants
• Bondgraph Modelling of Thermometallurgical Process in a Runout Table
• Some Studies on the Parametric Instability of Asymmetric as Well as Symmetric Sandwich Beam Configurations
• Solutions of Vibration Problems of Rods and Beams Using Refined Theories
• Grindability of Plasma Sprayed Ceramic Coatings
• Electrorheologically-modulated Flows of Complex Fluids in Narrow Confinements
• Parametric Instability of Sandwich Beams
• Neuro Dynamic Control of a Multi Degree of Freedom Inverted Pendulum with Relevance to Bipedal Walking
• Studies on Solar Radiation and Ambient Temperature Distributions and Monthly Average Utilizability
• Numerical Modeling and Validation of Friction Stir Welding with Different Tool Configurations
• Numerical and Experimental Studies on Crossflow Plate-Fin Heat Exchangers
• Dynamics, Control, and Optimal Motion Planning of Autonomous Underwater Vehicles
• Studies on Electron Beam Welding of Cu-Cr-Zr Alloy Plates and Spiking Phenomenon in Etp Copper Weldment
• Machining System Optimization for Multiple Spindle Automatic Lathe
• On the Dynamics of Lubricated Ball Bearings
• Studies on a Pressure Relief Valve with a Proportional Solenoid-Controlled Pilot Stage
• Theoretical and Experimental Studies on the Dynamics and Control of Intelligent Beam Structures
• Thermo-Fluid Modeling of Pulverized Coal Combustion and Numerical Predictions of Raceway Shape in a Blast Furnace
• Mixing and Free Surface Flow in Steelmaking Devices
• Adhesion Failure and Delamination Damage Analyses of Bonded Joints in Laminated FRP Composites
• Dynamics and Robust Control of Robotic Systems : A Bond Graph Approach
• Development of Computational Algorithms for Dispersed Two Phase Flow and Flow with Complex Interfaces
• Modeling of Swirl Nozzles: Investigations of Air Core Formation and Performance Parameters
• Applications of Artificial Neural Networks, Regression Analysis and Genetic Algorithms in Metal Casting
• Geometrically Nonlinear Analysis of Smart Laminated Composite Structures...
• Application of Statistical Methods and Fuzzy Logic Techniques to Predict Bead Geometry in Welding
• Investigations on External and Internal Hydraulic Jumps