Collections in this community

• Microstructure-Property Correlation of As Cast and Annealed Nb-Si-Mo Alloys with Selected Alloying Additions
• Pearlite Transformation in Near-Eutectoid Steels
• Development of Zr-Co-Based Rare-Earth-Free Permanent Magnets and Applications of Ferromagnetic Materials in Hard Magnetic Devices
• Experimental and Computational Analysis of Tin Based Oxides as Anode for Sodium-Ion Batteries
• Studies on formation of Si3N4-MoSi2 in-situ composites from Mo+Si3N4 powder mixture
• Studies on Germanium Nanostructures for Some Optical and Electronic Devices Production and Sintering of Nanocrystalline Zrb2 Powder and Development of ZrB2-Cu Composites
• Welding of Steel Plates: Development of an Appropriate Model
• Inclusion Removal by Synthetic Slag: An Experimental Investigation and Simulation Study
• Study on the Mechanical and Functional Behaviors of NiTi Based Shape Memory Alloys at Sub-Micron Scale
• Structure-Property Relationship of DC Magnetron Sputtered Amorphous/Nanocrystalline Ni-Zr Alloy Thin Films
• Experimental and Computational Study of High Capacity Silicon Oxide/Hard Carbon Based Anode Materials for Lithium-Ion Battery
• Development of Electrolyte-Separator Systems for Possible Magnesium Metal Battery Applications
• Microstructure and Texture Evolution during Plastic Deformation of alpha -Titanium and Associated Enhancement in Mechanical Properties
• Influence of Graphene Oxide Reinforcement and Alloying With Cu on Structure and Properties of Pulse Electrodeposited Nanocrystalline Ni-W Alloy
• Butt Welding of Zircaloy-4 using Electron Beam Welding: Temperature, Structure, Property Correlation
• Density Functional Theory and Experimental Studies of Doped 2-D Graphitic Carbon Nitride and Their Applications
• Correlation of Microstructure and Mechanical Properties with Ultrasonic Parameters in Metallic Materials
• Surface Modification of Metallic Materials by Plasma Immersion Ion Implantation for Enhancement of Hardness and Resistance to Wear and Corrosion
• Synthesis and Characterization of Ni-Ti, Ni-Ti Hf And Ni-Ti-Cu Thin Films Deposited By Rf/Dc Magnetron Co-Sputtering
• Evolution of Nanostructure, Thermal Stability, and Magnetocaloric Properties of a Few Fe- and Fe-Ni-Base Soft-Magnetic Mechanically Alloyed Powders and Ribbons
• Phase Stability, Microstructure Evolution And Deformation Behaviour of CoCrFeNi(Nbx/Tay) Eutectic High Entropy Alloys
• Creep and High Temperature Tensile Properties of Zr-2.5Nb Alloy
• Heat-Treatment and Effect of Microstructural Constituents on Impact Toughness of Low-Carbon Steel
• Nano- Micromechanical Studies of As-Cast and Cold Rolled Zr-Base Bulk Metallic Glasses
• Iron Based Alloys for Degradable Internal Fracture Fixation Devices with Enhanced Bactericidal Activity
• Structure-Property Relationship in Al Added Low Density Medium Mn Steel for Automotive Application
• Development of Aluminum Foam by Stir Casting, Powder Metallurgy, and Spray Forming Routes and its Performance Evaluation
• Development of Fe based Metallic Glass Composite Coating by HVOF Spraying: Optimization of Corrosion and Wear Resistance
• Development of Nano-oxide Dispersed Ferritic Alloys by Mechano-Chemical Synthesis and Advanced Consolidation Techniques
• Processing and Characterisation of Cast Al-Ti02 Composites
• Preparation and Mechanical Properties of some Aluminium Base in Situ Particulate Composites
• Microstructure Evolution and Deformation Mechanisms under Tensile and Cyclic Loading in Ti-5Al-5Mo-5V-3Cr Alloy
• Experimental and Density Functional Theory Based Study of Electrode Materials of Sodiumion Battery
• Effect of Binder Composition and Process Parameters on Laser Composite surfacing of AISI 304 Stainless Steel with WC
• Studies On Micro Alloyed Grey Cast Irons and Austempered Ductile Irons
• Synthesis of Nanocrystalline Aluminides in Al-Ni-Fe System by Mechanical Alloying
• Evolutionary Data Driven Modeling of Nonlinear Noisy Data and Optimization of Critical Parameters in Blast Furnace Iron Making Process
• Investigation of Crystal Structure, Microstructure, and Magnetic Properties of Sm-Co-Based Nano-Composite Ribbons with the Addition of Transition Metal, Metalloid, and Lanthanides
• Nondestructive Characterization of Structure and Property of M250 Grade Maraging Steel During Thermal Aging
• Effect of Si Addition on Microstructure, Mechanical, and Oxidation Properties of Nanostructured Oxide Dispersion Strengthened Reduced Activation Ferritic Steel Synthesized by Spark Plasma Sintering
• Synthesis and Characterization of Aluminium Based In-Situ Dual Matrix Composites
• Development of Aluminum Added Medium Manganese Steel for Automotive Applications
• Development of Magnesium Phosphate Based Ceramics for Bone Tissue Engineering
• Exergy Analysis of Rotary Hearth Furnaceelectric Arc Furnace (Rhf-Eaf) Route towards Sustainable Steelmaking
• Direct Current Conduction and Ultrasonic Investigations of Polymer/Metal Composites
• Studies on Laser Surface Structuring and Laser Shock Peening of Ti6Al4V and its Effects on Corrosion and Tribocorrosion Properties for Bioimplant Applications
• Lean Mg-Zn-Al and Mg-Al-Ca-Mn Alloys for Ambient and Elevated Temperature Applications: Development, Processing and Structure-Property Correlation
• Rare Earths Decorated 2D Graphitic Carbon Nitride for Photocatalytic Water Treatment and Electrochemical Energy Applications
• Kinetics of Diffusional Phase Transformation and Microstructure Evolution During Galvannealing
• Influence of Melt Treatments on Mechanical Properties, Sliding Wear and Machinability of Al-Si Alloys
• Applications of Genetic and Evolutionary Algorithms in Hot Rolling of Steel Strips
• Design of Oxygen Donor Ligands for Selective Separation of Lanthanides
• Processing Induced Microstructural Evolution and Property Modification for Metastable β Ti-5Al-5V-5Mo-3Cr Alloy
• Strengthening and Twinning Mediated Plasticity in As-Cast and Thermomechanically Treated CoCr1.3FeNi0.7mnnbx Eutectic High Entropy Alloy with Low Stacking Fault Energy
• Insights into Dislocation Core Phenomena Through Modeling and Simulations
• Synthesis and Characterization of Separator Electrolyte System for Lithium and Sodium Ion Batteries
• Development of High Capacity Tin-alloy based Negative Electrode for Lithium–Ion Battery
• Evolution of Grain Structure, Texture, and Precipitate during Recrystallization of Ferritic Steel
• Development of Wear Resistant Carbide-Free Bainitic and Martensitic Steels
• Engineering the Low-Temperature Cleavage Fracture Resistance of Steel: A Microstructure-to-Atomic Level Approach
• Exploring the Role of Local Microstructures on the Mechanical Behavior of Low-Carbon Ferritic Steel
• A Comprehensive Study on Flow Behaviour, Hot Workability and Dynamic Microstructural Evolution during Hot Compression in High Alloyed Austenitic Stainless Steels: Experimental and Simulation Approaches
• Microstructure and Mechanical Properties of Laser Welded Dual Phase Steel: Effect of Welding Speed
• Bulk-to-Local Deformation behaviour of High-Performance Steels
• Effect of Multiphase Microstructure on Bendability and Impact Toughness of Ultra-High-Strength Strip Steels
• Multiscale Deformation Behavior and Corrosion Response of a Compositionally Complex Lightweight Steel
• Some Effects of Gas Bubble Agitation during Steel Making
• Studies on Sintering Kinetics of Nanocrystalline Titanium Powder
• Effect of Zr and Fe Addition on Oxidation Behavior of Arc-Melted or Spark Plasma Sintered Mo–Si–B Alloys in Dry or Moist Air
• Effect of Thermo-Mechanical Processing on Microstructure and Mechanical Properties of High Manganese Steels
• Studies on Kinetics of Iodide Film Growth on Pb, Ag & Their Doped Varieties in Iodine Atmosphere
• Deformation and Fracture Behavior of Hot-Rolled Mg-3al-0.5ce Alloy
• Thermal Behavior and Nanomechanical Properties of Spark Plasma Sintered Aluminum Based in-situ Amorphous Nanocomposites
• Influence of Microstructural Features on Intergranular and Pitting Corrosion in Austenitic Stainless Steel
• Deformation Behavior and Microstructural Evolution during Creep of Inconel 617 Alloy at Advanced Ultra-Super Critical Temperatures
• Density Functional Theory Studies on PVDF-based Composites and their Applications
• Densification Behavior and Structure-Property Relations of Lab6-Added Zrb2-Sic Based Ultra High Temperature Ceramic Composites
• Development of Nano-Ceramic Dispersed Metal Matrix (Cu-Cr/Cu-Cr-Ag) Composites for Electrical Contacts
• Fading and Poisoning Phenomena in The Grain Refinement of AI-7Si Alloy
• Studies on Electron Beam Welding of Titanium (CP Ti), Its alloys (Ti6Al4V) and Niobium (Nb)
• Development of Zinc-Based Alloys for Biodegradable Implant Application
• On Synthesis and Characterization of Nanofluids formed by Dispersing Al2o3, Bn and Carbon Black-Bn Nano-Powders in Water and/or Ethylene Glycol
• Evolution of Microstructure during Quenching and Partitioning
• Evolution of Microstructure and Microtexture in Thermo- Mechanically Processed Al-4.5Cu-5tib2 In-Situ Composite and Its Impact on Mechanical and Wear Behavior
• Effect of Microstructure and Crystallographic Texture on Mechanical Properties of Modified 9Cr-1Mo Steel
• Production of Silicon Carbide from Rice Husk for Aluminum Matrix Composites
• Mechanical Properties of Topologicallyengineered 3D Printed Architectures
• Microstructural Modification to Enhance the Properties of Carbon Nanotube Reinforced Copper Composites
• Prospects of a Thermally and Thermomechanically Processed Essential Nutrient Element-Enriched Magnesium Alloy in Temporary Implantation
• Development of Novel Material Systems for Lithium and Sodium-Ion Batteries
• Effect of Ageing on Monotonic and Cyclic Deformation Behaviour in a Ni-Based Superalloy, HAYNES 282
• Deformation Behaviour in Aluminium-Lithium Alloy Sheet during Different Forming Processes: A Perspective from Microstructure and Texture Evolution
• Studies on Electron Beam and Laser Surface Melting and Welding of Inconel 718
• Studies on Transformation in Austenitic Stainless Steels
• Experimental and Multiscale Modelling of Hard Carbon and Nitrogen-Doped Hard Carbon as Anode for Lithium and Sodium-Ion Battery
• Synthesis and Evaluation of Multi-Scale Mechanical Properties of Spark Plasma Sintered Bimodal Al-CNT Nanocomposites
• Development of High Strength Bainitic Steels
• Dissimilar Joining Of Iron Based 7% Aluminium Alloy to Mild Steel and Dual Phase Steel (Dp600) to 5754 Aluminium Alloy Joints Using Electron Beam Welding
• Electron Beam Welding of Copper - 304ss, 316l Ss and Ti-6al-4v Alloy in Dissimilar and Similar Configuration
• Reduction Kinetics of Iron Ore-Coal Composite Pellets in Rotary Hearth Furnace
• Processing-Microstructure-Property Correlation for Tial-Based Intermetallic Alloys
• Synthesis and Characterization of ZrB2-SiC Based Composites for Ultra-High Temperature Structural Applications
• Development of Ni-Ti-Based Multilayer Shape Memory Alloys: Experimental and Computational Study
• Thermo Mechanical Processing of Trip Aided Steel
• Development of 58s Bioactive Glass Coatings Over 316l Stainless Steel via Electrophoretic Deposition Route for Orthopedic Applications
• Development of Novel Cyanide-Free Electroplating Baths for the Deposition of Precious Metals
• Nucleation of Line Defects: Insights from Computational Modeling
• Thermomechanical Processing Simulation on the Grain Refinement, Texture Evolution and Avoidance of Defects in Industrial Grade Steels
• High Strain Rate Deformation Behaviour of Automotive Grade Steels
• Factors Influencing the Thermal Conductivity of Nanofluids and Their Rationalization through Experimentation and Mathematical Modeling
• Studies on Improvement of Wear and Corrosion Resistance of Interstitial Free Steel by Plasma Nitriding and Sputtering
• Effect of Cold Rolling on the Glass Transition Temperature and Internal Pressure of a Few Zr-Base Metallic Glasses
• Evolution of Microstructure during Hot Dip Coating of High Strength Steels: Effect of Surface Modification
• Novel Analytical and Polycrystal Plasticity Approach to Compute Twin-Induced Deformation Behavior, Microstructure and Texture Evolution in Mg-3al-0.3mn Alloy
• Microstructure and Texture Engineering of a Low Carbon Microalloyed Dual-Phase Steel Sheet to Optimize Strength, Ductility, and Formability
• Processing and Structure-Property Relationships of Nanocrystalline Silicon Carbide
• Development of Cobalt Free Refractory High Entropy Alloys for Total Joint Arthroplasty
• Tribological Behaviour of Ni-Cr-B Hardface Coating in Liquid Sodium Environment
• Implications of Thermal and Thermo-Mechanical Processing Induced Microstructural Evolution on Intergranular and Pitting Corrosion Behavior in Alloy 600H
• Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of Fe-Mn-Al-Si-C Steels
• Kinetics of Oxidation of Copper and Its Alloys at Low and Intermediate Temperatures
• Study on Hot Deformation Behaviour and Weldability of EN30B/EN25 Steel
• Effect of Thermomechanical Processing on Microstructure, Tensile and Impact Properties of Pearlitic Steel
• Influence of Atmosphere on the Microstructure and Mechanical Behavior of Stainless Steel and Niti Based Shape Memory Alloy
• Hydrogen Embrittlement in High Strength Steels: Assessment and Prevention
• Structure-Property Correlation of Ni50Mn28Ga22 Melt-spun Ribbons
• Development of Wear and Corrosion Resistant Plasma Sprayed Low Chromium Containing Fe-Based Amorphous/ Nanocrystalline Protective Coating
• Study of Some Complex Metallurgical Systems by Computational Intelligence Techniques
• Study of the Catalytic Characteristics of Mechanically Alloyed Nanocrytalline Nickel Aluminides in H2o2 Decomposition
• Effect of Cooling Rate and AI Content on Microstructure, Mechanical Properties and Oxidation Behavior of (Ni0.92Zr0.08)100-xAlx (0 ≤ x ≤ 4 at.%) Nano–/Ultrafine Eutectic Composites
• CFD Study on the Gas Dynamics, Heat and Mass Transfer during Sponge Iron Production from Iron-Ore Coal Composite Pellets in Rotary Hearth Furnace
• Development of Low Expansion and High Strength Aluminium Matrix Hybrid Composites
• Effect of Microstructure and Texture on the Mechanical and In-Vitro Bio-Corrosion Properties of Mg-Zn-Ca-Mn Alloy for Biomedical Applications
• Relative Effect of Boron and Nitrogen on Creep Properties of Modified 9Cr-1Mo Steel Base Metal and Simulated Heat Affected Zone
• Influence of Alloy Composition and Microstructure on Strength-Impact Toughness Combination of Steels for Strategic Applications
• Aluminium Based Nanocomposites Developed By Mechanical Alloying And Non-Contact Ultrasonic Casting
• Creep Behavior of Hot Rolled Powder Metallurgy Processed Al-SiCp Composites
• Nano-Intermetallic/Ceramic Dispersed Al-Based Amorphous/Nanocrystalline Matrix Composites Synthesized By Mechanical Alloying
• Some studies on the mushy state rolling of Al-4.5Cu alloy based in-situ composites reinforced with TiB2 or TiC particles
• Structure-Property Relationships in Nb-Si-Mo alloys
• Non-Isothermal, Isothermal and Cyclic Oxidation Behaviour of Mo-Si-B and Mo-Si-B-Al alloys
• Mathematical Modeling of Metal Droplet Impingement on a Substrate and its Experimental Validation
• Development of Tungsten Heavy Alloys Through Mechanical Alloying Route
• Synthesis of Carbon Fiber Reinforced Silicon Carbide Composites by Soft-Solution Approach
• Kinetics and Mechanism of Thin Halide Film Growth on Silver at Low Temperatures
• Optimization of Hydrometallurgical Processing of Lean Manganese Bearing Resources
• Multiphase Flow Numerical Modelling for Simulation of the Injection Stage of Powder Injection Moulding (PIM)
• A Model of Thermal Conductivity of Nanofluids and its Experimental Validation
• Crack Growth Around Fatigue Threshold of Low-Carbon Ferrite-Bainite Steels
• Synthesis and Characterization of Pulse Electrodeposited Ni-CeO2 Nanocomposite Coatings
• Mechanical Properties and Tribological Behaviour of Carbon Fibre Reinforced Composites with Carbon, Phenolic or Epoxy Matrices
• Synthesis and Characterization of Ceria Reinforced Copper Matrix Nanocomposite Coatings
• Monotonic and Cyclic Fracture Behaviour of AISI 304LN Stainless Steel
• Influence of Pre-strain and Gradient Microstructure on Wear Behaviour of Plain Carbon Steels
• Structural, Magnetic, Magnetoresistance and Optical Properties of Chemically Synthesized Rare-Earth...
• Effect of Process Parameters on Mechanical Properties of AISI 4335 Steel
• Synthesis and Characterization of Nickel, Titanium and Nickel-Titanium Thin Films by Magnetron Sputtering...
• Studies on Austempering of High Carbon Low Alloy Steel for Enhanced Strength and Toughness
• Preparation and in vitro Characterization of Zirconia and Alumina Based Bioceramics
• Processing and Characterisation of Aluminium - Scandium Alloys and Composites
• Mechanical Activation and Reactivity of Aluminium Oxyhydroxide Minerals
• Bake Hardening in Low and Medium Carbon Steels
• Microstructure, Mechanical Properties and Oxidation Behavior of Some Tungsten Alloys
• Deformation behavior of ribbons of Copper-Zirconium based metallic glass with nanocrystalline precipitates...
• Development of Ceria Reinforced Lead Free Tin Based Nanocomposites By Pulse Co-electrodeposition Technique
• Accumulation of Ratcheting Strain in Polycrystalline Metallic Materials
• Effect of Annealing on Texture Evolution and Oxide Formation in Nanocrystalline Nickel-Iron Alloys
• Effects of Microalloy Precipitates on Austenite Grain Growth during Reheating Treatment of HSLA Steel
• Atomistic Simulations of Methane Hydrates and Inhibitor Design
• Structural Studies on Tempering Behaviour of Silicon Steels
• The Study of the Possibilities and Conditions of Reduction of Zirconium Dioxide by Magnesium in Various Gaseous Media
• Detection and Characterization of Defects by Eddy Current Testing Using Pattern Recognition Approaches
• Pretreatment of High-Silicon Hot Metal by Soda Ash-Based Flux
• Inhibitor Evaluation by Polarization Measurements as Influenced by the Position of the PZC
• Behaviour of Copper Bearing Stainless Steels: Phase Transformation and Corrosion Characteristics
• Vacuum Sintering of Self-Lubricating Bronze Bearings
• Some Studies on Dependence of Pzc on Defect Structure of Metal Oxides and Dye Adsorption (Hamctehstks in Metal Oxide...
• Studies on Packed and Fluidized Bed Reduction of Iron Ore Fines by Coal Fines
• A Study on The Feasibility of Utilization of Low Grade Laterites for the Manufacture of Iron
• Quantitative Studies on the Strengthning Characteristics of Various Aluminium Alloys by the Application...
• Thermodynamics and Kinetic Studies on Sulfation of Some Metal Oxide and a Process Development on the Recovery...
• Some Studies on the Sintering Characteristics of Hematite and Magnetite Concentrate in Presence of Alumina
• Heat and Mass Tansfer during the Diffusion Melting of Iron and Steel in Iron Carbon Metal
• Physico-Chemical Properties of Molten Blast Furnance Slags
• Synthesis of MWCNT Reinforced AI-Si Nanocomposites by Microwave Sintering and Spark Plasma Sintering
• A Study of the Mechanism of Stress Corrosion Cracking in Alpha Brass
• Stress-Change Tests in the Study of the High Temperature Creep of Metals
• High Temperature Oxidation Behavior of Tungsten Based Materials Processed by Powder Metallurgical Route
• Processing-Microstructure-Property Correlation in an Aircraft Structural Application Alloy Ti-5Al-5Mo-5V-3Cr
• Studies on Cast Al-Fe-V-Si Alloys
• Some Studies on the Phase Transformation and Mechanical Behavour of Ti-Ni Shape Memory Alloys
• Potentiosatic Anodic Polarization and Corrosion Rate Studies of Iron and some Alloy Steels in 1% H2SO4
• Synthesis and Characterization of Tin Oxide and Zinc Oxide Based Thin Films and 1-D Nanostructures for Functional Applications
• Studies on Hydrogen Enhanced Fatigue and Effect of Overload in a Cu-strengthened High Strength Low Alloy Steel
• Trip Aided Steel for Automotives with Better Formability and Coating Behaviour
• Laser Surface Engineering of AISI H13 Hot Work Tool Steel
• Structure−Property Relations in Zirconium and Hafnium Diboride Based Ultra High Temperature Ceramic Composites
• Studies on the Characteristics of Cast Binary Al-Li Alloys
• A Study on Gas Permeation in Solids
• Topochemical Sintering of Ba-and Sr-hexaferrites
• Modelling of Eutectoid Transformation in Plain-Carbon and 1.41 Wt% Cr Steels
• Synthesis and Characterization of Al-4.5wt%Cu/Zircon Sand Composite Produced by Stir Casting Route
• Preparation and Structural Investigations of Y2O3 Dispersed Ferritic Steel
• Reduction Efficiency of Iron Ore-Coal Composite Pellets in Tunnel Kiln
• Surface Engineering of Steel Substrate through a Novel Cu-Sn Alloy Coating towards Improving Adhesion at Steel-Rubber Interface
• Study of Mass Transfer Efficiency of Liquid Slag Injection as an Alternative Steel Refining Technique through Physical Modeling
• Studies on Stress Corrosion Cracking of AISI 316 Stainless Steel in Polythionic Acid
• Synthesis and Characterization of Ni-Ti, Ni-Ti-Hf and Ni-Ti-Cu Thin Films Deposited by RF/DC Magnetron Co-Sputtering
• Lanthanum Gallate Based Electrolyte Materials for Solid Oxide Fuel Cell Application
• Effect of Boron and Carbon on Microstructures, Mechanical Properties and Deformation Mechanisms of Beta Ti-15-3 Alloy
• Data Driven Models for Indian Iron and Steel Making Operations
• Synthesis of Negative Thermal Expansion Material Y2w3o12 and Fabrication of Low Thermal Expansion Cu/Y2w3o12 Composite
• Microstructure and Deformation Behaviour of Nano–/Ultrafine Ti–Fe–(Sn) and Ni–Zr–(Al) Eutectic Composites
• Studies on the Grain Refinement of Al-Cr, Al-Zr and Al-Si Alloys using Al-Ti-B Master Alloy
• Optimisation of Cold Bonded Pellets and Study of Melting Behaviour of Pre-Reduced Composite Pellets
• Studies on the Grain Refinement and Modification of some Hypoeutectic and Eutectic Al-Si Alloys
• A Study on the Removal of Inclusions in Steels by Halide Salt Treatment and Filtration
• Investigations on Kinetics & Mechanism of Reoxidation of Direct Reduced Iron
• Studies on Nonisothermal Kinetics of Iron Ore Reduction
• Sintering and Blast Furnace Iron Making — Theoretical and Experimental Investigations
• Studies on Chromium White Cast Irons
• Studies on wear characteristics of plain carbon hypo-eutectoid and eutectoid steels
• Inclusions in 20Mncr5 Steel
• Some Aspects of Discontinuous Transformations in Pu-Sn and Cu - Ag Alloys
• Studies on Laser Assisted Composite Surfacing of Commercial Metals and Alloys for Tribological Application...
• Studies on Mechanical Properties and Stress Corrosion Cracking of Generator Rotor End-Retaining Ring of 18nn - 4cr Steel...
• Studies on The Mechanism and Kinetics of Discontinuous Precipitation & Coarsening in a Few Zn-Rich Binary Alloys
• Deformation Induced Transformation of Retained Austenite in Trip Aided Steels
• Mathematical Modeling of Twin-Roll Strip Casting of Al-33Cu and Its Experimental Validation
• Microstructure-Property Relationships in Mushy State Rolled in-situ Al-4.5Cu-5TiB2 Composite
• On the Formation of Aluminum Carbide in Aluminium/Silicon Carbide Particulate Composites
• Processing and Structure-Property Relations of Ni-Tin Nanocomposite Thin Films Deposited by Reactive Magnetron Co-Sputtering
• Processing of Particulate Metal Matrix Composites with Intensive Melt Shearing
• Some Studies on Copper Containing Interstitial Free Steels
• Some Studies on Reduction Kinetics of Iron Ore – Graphite Composite Pellets...
• Synthesis and Characterization of Bulk Metal Matrix Nanocomposites Prepared ...
• Surface Engineering of Sae 52100 Steel
• Synthesis, Characterization and Modeling of Nanofluid for Advanced Heat Transfer Applications
• Surface Treatment of Ti-6al-4v for Bio-Implant Application
• Copper Matrix Nanocomposite Coating for Electrical Contact Application by Pulse Reverse Electrodeposition
• Effect of Nature and Morphology of Discontinuous Reinforcement on Structure-Property Behaviour of Alumina Matrix Composites
• Studies on Titanium Carbide Reinforced Ferrous Composites Prepared by Plasma mSmelting of Ilmenite Ore
• Studies on the Kinetics and Mechanism of Some Invariant Reactions in Binary Systems
• Studies on the Strengthening in Fe-Ni-Mn Alloys Containing Mo, Co, Al, Ti Etc.
• Experimental and Theoretical Studies on Particle Distribution in Cast Aluminium- Based Metal Matrix Composites
• Quantitative Study on Superplastig Behaviour of Some Tn-Ai Eutectoid/Near-Eutectqid Alloys...
• Erosion-Oxidation Interaction for Ni and Ni-20cr Alloy
• Some Studies on Aluminium Matrix in-Situ Composites Produced by Chemical Reactions
• Influence of Short-Circuiting and Static Charge Supply on the Oxidation Kinetics of Cu, Cu-Li...
• Dephosphorization of High Carbon Ferromanganese Using Baco3 Based Fluxes
• Studies on the Thermo-mechanical Processing of Al-5Ti and Al-5Ti-lB Master Alloys used for the Grain Refinement...
• A Study on Recrystallization Behaviour and Mechanical Properties of Some Aluminium Packaging Alloys
• Studies on Isothermal and Nonisoothermal Production of Iron Ore Fines Surrounded by Coal Fines
• Studies on the Cement-Bonded Briquettes of Iron and Steel Plant By-products as Burden Material for Blast Furnaces
• A Study on Reduction-Smeltingof Chromite
• Kinetics of Oxidation of Copper and its alloys at low and Intermediate Temperatures
• Studies on the Dissolution of Second Phase in Alloys
• Study of Mill Diagnostics by Vibration Signature Technique
• Studies on Compositionally Graded Thermal Barrier Coatings Developed by Thermal Spraying and Pulsed Laser Deposition
• Effect of Microstructure and Crystallographic Texture on Impact Toughness in Low Carbon Ferritic Steel
• Development of Novel Thermal Barrier Coating for Gas Turbine
• Production of a-Silicon Nitride and Silicon Oxynitride from Rice Husks
• Hydrogen Embrittlement of HSLA-80 and HSLA-100 Steels in Seawater under Cathodic Charging Conditions
• A Study of Mechanism of Carbon Oxidation Reaction in Iron-Carbon Melts
• Synthesis and Characterization Of TiC/ZrC Reinforced Iron-Based Composites
• Processing and Characterisation of Aluminium Base Short Steel Fiber Reinforced Composites
• Processing and Characterization of Advanced Zinc-Aluminium Based Alloys
• Studies on Development of Al-Based Amorphous Alloys or Nan O-Intermetallic Dispersed Amorphous Matrix ..

  Composite by Mechanical Alloying
• Study and Control of Properties and Behaviour of Various Sand Systems Used for Metal Casting ...

  by Application of Statistical Design of Experiments
• The Effect of Creep Stress on Carbide Reactions During Tempering of Alloy Steels
• Chemical and Metallurgical Factors Affecting the Failure of Metals and Alloys under the Combined Action of Stress and Corrosion
• Studies on Stress Corrosion Cracking and Mercury Cracking in Brasses
• Studies on Microstructure and Mechanical Properties of Tungsten Inert Gas and Electron Beam Welded Grade 91 Steel
• Genetic Algorithms Based Optimization Of Phase Transformation Cycle Evolved Using Cellular Automata
• Microstructure Property Relationship in Thermo Mechanically Processed Austenitic Manganese Steels and Composites
• Structure-Property Relationships in Nb-Si-Cr and Nb-Si-Ti Alloys
• High Temperature Behaviour of Welded Powder Metallurgy Parts
• Studies on Some Characteristics of Cast Fe— Mn— Al Alloys
• Kinetics of Decarburization of Iron-Chromium Melts In Oxidizing Atmosphere
• Creep Strengthening of Metals
• Development of Ore-Coal Composite Pellets and Investigations on Their Reduction Behaviour
• Mathematical Modelling of Reduction of Iron Ore in Rotary Kiln
• Effect of Pre-Treatment on the Quenching and Tempering Characteristics of High Carbon Steels
• A Study on the Effects of Certain Minor Additives on Solidification and Graphitisation in White Cast Iron
• Studies on Production of Water Atomized White Cast Iron and Iron Powders from Sponge Iron Fines and Composite Manufacturing
• Characterisation of Retrogression and Reaging Behaviour of 8090 and 1441 Al-Li-Cu-Mg-Zr Alloys...
• Kinetics of Electrode Processes of Sulphides in Aqueous Solutions and Direct Electrowinning of Lead...
• Studies on Dephosphorisation of Steel under Conditions of Industrial Relevance and Desulphurisation of Cast Iron...

  using an Electrochemical Technique
• On the Carbon Reduction of Iron Oxide Rich Slags
• Residual Life Estimation in Fluctuating Loading
• Synthesis and Characterization of Aluminium Matrix Micro and Nano Composites Reinforced by In-Situ Alumina Particulates
• Synthesis of Nanostructure Multi-layered Ni/Ti Thin Film by Magnetron Sputtering and Effect of Annealing
• Study of the Catalytic Characterization of Mechanically Alloyed Nanocrystalline Nickel Aluminides in H2O2 Decomposition
• Some Studies on the Mechanisms and Kinetics of Mechanical Alloying
• Dissolution of Cored Wire Additions in Steelmaking
• Influence of deformation-zone geometry on deformation parameters and pressure in rolling wiht plain-barrel rolls
• Surface Engineering Of Aisi 316l Stainless Steel For Bioimplant Application
• Surface Modification And Coatings on Titanium Based Alloy (Ti-6al-4v) for Bioimplant Application
• Studies on Kinetics of Fluidized Bed Roasting of High Goethetic Indian Iron Ore Fines
• High Temperature Creep Behavior of Welded P91B Steel
• Development of NiCrSiB Coating on AISI 304 Stainless Steel for Hot Corrosion...
• Processing, Structure and Properties of Silica Foams
• Studies on Some Characteristics of Austempered Ductile Irons
• Influence of Variation in Alloy Microstructure on the High Temperature Oxidation of 2.25cr-Lmo and 9cr-Lmo Steels
• Structure-Property Relationship in Vanadium, Niobium and Titanium Modified 9% Chromium Heat Resistant Steel
• Metallurgical Studies for the Development, Characterisation and Evaluation of an Improved
• Initiation and Growth of Cracks Near Fatigue Threshold in Plain Carbon Steels
• Synthesis and Characterization of Nanocrystalline Silicides by Mechanical Alloying in Fe-Ni-Si System
• Effect of Monotonic and Cyclic Loading on the Fracture Behaviour of Sa 333 Steel
• Some Studies on Laser Surface Alloying of 304 Stainless Steel with Molybdenum and Copper with Chromium
• Study on the Ferrite Grain Structure and Precipitation in Thermomechanically Tailored HSLA Steel
• Studies on Microalloyed Grey Cast Irons and Austempered Ductile Irons
• Study of the Phase Transformation Characteristics in Some Copper Bearing Hsla Steels
• Synthesis and Characterization of Creep Resistant Sn-Cu-Y2O3 Nanocomposite Lead-Free Solder Synthesis and Characterization...
• A Density Functional Theory Based Study of Lanthanum Nickelate
• High Temperature Cyclic Deformation Behaviour of Polycrystalline Nickel Based Superalloys
• Development of High Alumina Bricks Using Reactive Mullite and Zircon Flour as Additives
• Environmental Degradation of FRP Composites
• Kinetics of Densieication of Powder Compacts During Non-Isothermal Sintering
• Studies on Compaction, Oxidation and Slag Corrosion of MgO-C Refractories for BOF Application
• Volume Fraction and Temperature Dependence of Particle Coarsening in Plain Carbon Steel
• Synthesis of Aluminium Based Bulk Metallic Glasses via Mechanical Alloying and Spark Plasma Sintering
• Investigation on the Kinetics of Growth of Thin Oxide Flims on Copper at Low Temperature
• Production of Electrolytic Iron Powder From Sponge Iron Fines
• Bare Bath Deoxidation Study on Low Alloy Steels in Electric Arc Furnace
• Some Studies on Discontinuous Ceramic Phases Reinforced Magnesium/Aluminium Based Metal Matrix Cast Composites
• Development of Aluminum-Alumina and Aluminum Alloy-Alumina Bulk Nanocomposites...
• Effect of Stacking Fault Energy on the Evolution of Nanostructure and Mechanical Properties in Cu100-Xznx (0 ≤ X ≤ 30 Wt.%)...
• The Relation Between Structure and Properties in Ti-6.5al-3.3mo-L.6zr-Q.3si Alloy
• Studies on Aluminium Cast Irons
• Sintering of Silicon Carbide
• Precipitation and Magnetic - Ageing in Electrical Steels
• Phase Transformations and Corrosive Wear Behaviour of Cr-Mn-Cu White Cast Irons
• On the Grain refinement and Modification of Some Hypoeutectic Al-Si alloys
• Multi-Scale Modeling of Thermal Conductivity of Nanofluids and Design of Silver, Nickel Aluminide Dispersed Aqueous Nanofluids
• Strength and Fracture Behaviour of Spot Welds on Interstitial Free Steel Sheets