DSpace JSPUI

Microstructure-Property Correlation of As Cast and Annealed Nb-Si-Mo Alloys with Selected Alloying Additions

Pearlite Transformation in Near-Eutectoid Steels

Development of Zr-Co-Based Rare-Earth-Free Permanent Magnets and Applications of Ferromagnetic Materials in Hard Magnetic Devices

Experimental and Computational Analysis of Tin Based Oxides as Anode for Sodium-Ion Batteries

Studies on formation of Si3N4-MoSi2 in-situ composites from Mo+Si3N4 powder mixture

Studies on Germanium Nanostructures for Some Optical and Electronic Devices Production and Sintering of Nanocrystalline Zrb2 Powder and Development of ZrB2-Cu Composites

Welding of Steel Plates: Development of an Appropriate Model

Inclusion Removal by Synthetic Slag: An Experimental Investigation and Simulation Study

Study on the Mechanical and Functional Behaviors of NiTi Based Shape Memory Alloys at Sub-Micron Scale

Structure-Property Relationship of DC Magnetron Sputtered Amorphous/Nanocrystalline Ni-Zr Alloy Thin Films

Experimental and Computational Study of High Capacity Silicon Oxide/Hard Carbon Based Anode Materials for Lithium-Ion Battery

Development of Electrolyte-Separator Systems for Possible Magnesium Metal Battery Applications

Microstructure and Texture Evolution during Plastic Deformation of alpha -Titanium and Associated Enhancement in Mechanical Properties

Influence of Graphene Oxide Reinforcement and Alloying With Cu on Structure and Properties of Pulse Electrodeposited Nanocrystalline Ni-W Alloy

Butt Welding of Zircaloy-4 using Electron Beam Welding: Temperature, Structure, Property Correlation

Density Functional Theory and Experimental Studies of Doped 2-D Graphitic Carbon Nitride and Their Applications

Correlation of Microstructure and Mechanical Properties with Ultrasonic Parameters in Metallic Materials

Surface Modification of Metallic Materials by Plasma Immersion Ion Implantation for Enhancement of Hardness and Resistance to Wear and Corrosion

Synthesis and Characterization of Ni-Ti, Ni-Ti Hf And Ni-Ti-Cu Thin Films Deposited By Rf/Dc Magnetron Co-Sputtering

Evolution of Nanostructure, Thermal Stability, and Magnetocaloric Properties of a Few Fe- and Fe-Ni-Base Soft-Magnetic Mechanically Alloyed Powders and Ribbons

Phase Stability, Microstructure Evolution And Deformation Behaviour of CoCrFeNi(Nbx/Tay) Eutectic High Entropy Alloys

Creep and High Temperature Tensile Properties of Zr-2.5Nb Alloy

Heat-Treatment and Effect of Microstructural Constituents on Impact Toughness of Low-Carbon Steel

Nano- Micromechanical Studies of As-Cast and Cold Rolled Zr-Base Bulk Metallic Glasses

Iron Based Alloys for Degradable Internal Fracture Fixation Devices with Enhanced Bactericidal Activity

Structure-Property Relationship in Al Added Low Density Medium Mn Steel for Automotive Application

Development of Aluminum Foam by Stir Casting, Powder Metallurgy, and Spray Forming Routes and its Performance Evaluation

Development of Fe based Metallic Glass Composite Coating by HVOF Spraying: Optimization of Corrosion and Wear Resistance

Development of Nano-oxide Dispersed Ferritic Alloys by Mechano-Chemical Synthesis and Advanced Consolidation Techniques

Processing and Characterisation of Cast Al-Ti02 Composites

Preparation and Mechanical Properties of some Aluminium Base in Situ Particulate Composites

Microstructure Evolution and Deformation Mechanisms under Tensile and Cyclic Loading in Ti-5Al-5Mo-5V-3Cr Alloy

Experimental and Density Functional Theory Based Study of Electrode Materials of Sodiumion Battery

Effect of Binder Composition and Process Parameters on Laser Composite surfacing of AISI 304 Stainless Steel with WC

Studies On Micro Alloyed Grey Cast Irons and Austempered Ductile Irons

Synthesis of Nanocrystalline Aluminides in Al-Ni-Fe System by Mechanical Alloying

Evolutionary Data Driven Modeling of Nonlinear Noisy Data and Optimization of Critical Parameters in Blast Furnace Iron Making Process

Investigation of Crystal Structure, Microstructure, and Magnetic Properties of Sm-Co-Based Nano-Composite Ribbons with the Addition of Transition Metal, Metalloid, and Lanthanides

Nondestructive Characterization of Structure and Property of M250 Grade Maraging Steel During Thermal Aging

Effect of Si Addition on Microstructure, Mechanical, and Oxidation Properties of Nanostructured Oxide Dispersion Strengthened Reduced Activation Ferritic Steel Synthesized by Spark Plasma Sintering

Synthesis and Characterization of Aluminium Based In-Situ Dual Matrix Composites

Development of Aluminum Added Medium Manganese Steel for Automotive Applications

Development of Magnesium Phosphate Based Ceramics for Bone Tissue Engineering

Exergy Analysis of Rotary Hearth Furnaceelectric Arc Furnace (Rhf-Eaf) Route towards Sustainable Steelmaking

Direct Current Conduction and Ultrasonic Investigations of Polymer/Metal Composites

Studies on Laser Surface Structuring and Laser Shock Peening of Ti6Al4V and its Effects on Corrosion and Tribocorrosion Properties for Bioimplant Applications

Lean Mg-Zn-Al and Mg-Al-Ca-Mn Alloys for Ambient and Elevated Temperature Applications: Development, Processing and Structure-Property Correlation

Rare Earths Decorated 2D Graphitic Carbon Nitride for Photocatalytic Water Treatment and Electrochemical Energy Applications

Kinetics of Diffusional Phase Transformation and Microstructure Evolution During Galvannealing

Influence of Melt Treatments on Mechanical Properties, Sliding Wear and Machinability of Al-Si Alloys

Applications of Genetic and Evolutionary Algorithms in Hot Rolling of Steel Strips

Design of Oxygen Donor Ligands for Selective Separation of Lanthanides

Processing Induced Microstructural Evolution and Property Modification for Metastable β Ti-5Al-5V-5Mo-3Cr Alloy

Strengthening and Twinning Mediated Plasticity in As-Cast and Thermomechanically Treated CoCr1.3FeNi0.7mnnbx Eutectic High Entropy Alloy with Low Stacking Fault Energy

Insights into Dislocation Core Phenomena Through Modeling and Simulations

Studies on Electron Beam Welding of Aluminium, Austenitic Stainless Steel (AISI304SS), and P91 Steel in Similar and Dissimilar Combinations

Synthesis and Characterization of Separator Electrolyte System for Lithium and Sodium Ion Batteries

Development of High Capacity Tin-alloy based Negative Electrode for Lithium–Ion Battery

Evolution of Grain Structure, Texture, and Precipitate during Recrystallization of Ferritic Steel

Development of Wear Resistant Carbide-Free Bainitic and Martensitic Steels

Engineering the Low-Temperature Cleavage Fracture Resistance of Steel: A Microstructure-to-Atomic Level Approach

Exploring the Role of Local Microstructures on the Mechanical Behavior of Low-Carbon Ferritic Steel

A Comprehensive Study on Flow Behaviour, Hot Workability and Dynamic Microstructural Evolution during Hot Compression in High Alloyed Austenitic Stainless Steels: Experimental and Simulation Approaches

Microstructure and Mechanical Properties of Laser Welded Dual Phase Steel: Effect of Welding Speed

Bulk-to-Local Deformation behaviour of High-Performance Steels

Effect of Multiphase Microstructure on Bendability and Impact Toughness of Ultra-High-Strength Strip Steels

Multiscale Deformation Behavior and Corrosion Response of a Compositionally Complex Lightweight Steel

Some Effects of Gas Bubble Agitation during Steel Making

Studies on Sintering Kinetics of Nanocrystalline Titanium Powder

Effect of Zr and Fe Addition on Oxidation Behavior of Arc-Melted or Spark Plasma Sintered Mo–Si–B Alloys in Dry or Moist Air

Effect of Thermo-Mechanical Processing on Microstructure and Mechanical Properties of High Manganese Steels

Studies on Kinetics of Iodide Film Growth on Pb, Ag & Their Doped Varieties in Iodine Atmosphere

Deformation and Fracture Behavior of Hot-Rolled Mg-3al-0.5ce Alloy

Thermal Behavior and Nanomechanical Properties of Spark Plasma Sintered Aluminum Based in-situ Amorphous Nanocomposites

Influence of Microstructural Features on Intergranular and Pitting Corrosion in Austenitic Stainless Steel

Deformation Behavior and Microstructural Evolution during Creep of Inconel 617 Alloy at Advanced Ultra-Super Critical Temperatures

Density Functional Theory Studies on PVDF-based Composites and their Applications

Densification Behavior and Structure-Property Relations of Lab6-Added Zrb2-Sic Based Ultra High Temperature Ceramic Composites

Development of Nano-Ceramic Dispersed Metal Matrix (Cu-Cr/Cu-Cr-Ag) Composites for Electrical Contacts

Fading and Poisoning Phenomena in The Grain Refinement of AI-7Si Alloy

Studies on Electron Beam Welding of Titanium (CP Ti), Its alloys (Ti6Al4V) and Niobium (Nb)

Development of Zinc-Based Alloys for Biodegradable Implant Application

Reduction Behaviour of Off-Grade Iron Ore Fines and Electric Arc Furnace Dust (EAFD)-Carbon Composite Pellets

On Synthesis and Characterization of Nanofluids formed by Dispersing Al2o3, Bn and Carbon Black-Bn Nano-Powders in Water and/or Ethylene Glycol

Evolution of Microstructure during Quenching and Partitioning

Evolution of Microstructure and Microtexture in Thermo- Mechanically Processed Al-4.5Cu-5tib2 In-Situ Composite and Its Impact on Mechanical and Wear Behavior

Effect of Microstructure and Crystallographic Texture on Mechanical Properties of Modified 9Cr-1Mo Steel

Production of Silicon Carbide from Rice Husk for Aluminum Matrix Composites

Mechanical Properties of Topologicallyengineered 3D Printed Architectures

Microstructural Modification to Enhance the Properties of Carbon Nanotube Reinforced Copper Composites

Prospects of a Thermally and Thermomechanically Processed Essential Nutrient Element-Enriched Magnesium Alloy in Temporary Implantation

Development of Novel Material Systems for Lithium and Sodium-Ion Batteries

Exploring the alloy space in a new generation γ-TiAl system -- (Ti-xAl-yNb-1Mo-1Cr-0.2C-0.2B (at.%))

Effect of Ageing on Monotonic and Cyclic Deformation Behaviour in a Ni-Based Superalloy, HAYNES 282

Deformation Behaviour in Aluminium-Lithium Alloy Sheet during Different Forming Processes: A Perspective from Microstructure and Texture Evolution

Studies on Electron Beam and Laser Surface Melting and Welding of Inconel 718

Studies on Transformation in Austenitic Stainless Steels

Experimental and Multiscale Modelling of Hard Carbon and Nitrogen-Doped Hard Carbon as Anode for Lithium and Sodium-Ion Battery

Synthesis and Evaluation of Multi-Scale Mechanical Properties of Spark Plasma Sintered Bimodal Al-CNT Nanocomposites

Development of High Strength Bainitic Steels

Dissimilar Joining Of Iron Based 7% Aluminium Alloy to Mild Steel and Dual Phase Steel (Dp600) to 5754 Aluminium Alloy Joints Using Electron Beam Welding

Electron Beam Welding of Copper - 304ss, 316l Ss and Ti-6al-4v Alloy in Dissimilar and Similar Configuration

Reduction Kinetics of Iron Ore-Coal Composite Pellets in Rotary Hearth Furnace

Processing-Microstructure-Property Correlation for Tial-Based Intermetallic Alloys

Synthesis and Characterization of ZrB2-SiC Based Composites for Ultra-High Temperature Structural Applications

Development of Ni-Ti-Based Multilayer Shape Memory Alloys: Experimental and Computational Study

Thermo Mechanical Processing of Trip Aided Steel

Development of 58s Bioactive Glass Coatings Over 316l Stainless Steel via Electrophoretic Deposition Route for Orthopedic Applications

Development of Novel Cyanide-Free Electroplating Baths for the Deposition of Precious Metals

Nucleation of Line Defects: Insights from Computational Modeling

Thermomechanical Processing Simulation on the Grain Refinement, Texture Evolution and Avoidance of Defects in Industrial Grade Steels

High Strain Rate Deformation Behaviour of Automotive Grade Steels

Factors Influencing the Thermal Conductivity of Nanofluids and Their Rationalization through Experimentation and Mathematical Modeling

Studies on Improvement of Wear and Corrosion Resistance of Interstitial Free Steel by Plasma Nitriding and Sputtering

Effect of Cold Rolling on the Glass Transition Temperature and Internal Pressure of a Few Zr-Base Metallic Glasses

Evolution of Microstructure during Hot Dip Coating of High Strength Steels: Effect of Surface Modification

Novel Analytical and Polycrystal Plasticity Approach to Compute Twin-Induced Deformation Behavior, Microstructure and Texture Evolution in Mg-3al-0.3mn Alloy

Microstructure and Texture Engineering of a Low Carbon Microalloyed Dual-Phase Steel Sheet to Optimize Strength, Ductility, and Formability

Processing and Structure-Property Relationships of Nanocrystalline Silicon Carbide

Development of Cobalt Free Refractory High Entropy Alloys for Total Joint Arthroplasty

Tribological Behaviour of Ni-Cr-B Hardface Coating in Liquid Sodium Environment

Implications of Thermal and Thermo-Mechanical Processing Induced Microstructural Evolution on Intergranular and Pitting Corrosion Behavior in Alloy 600H

Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of Fe-Mn-Al-Si-C Steels

Kinetics of Oxidation of Copper and Its Alloys at Low and Intermediate Temperatures

Study on Hot Deformation Behaviour and Weldability of EN30B/EN25 Steel

Effect of Thermomechanical Processing on Microstructure, Tensile and Impact Properties of Pearlitic Steel

Influence of Atmosphere on the Microstructure and Mechanical Behavior of Stainless Steel and Niti Based Shape Memory Alloy

Hydrogen Embrittlement in High Strength Steels: Assessment and Prevention

Structure-Property Correlation of Ni50Mn28Ga22 Melt-spun Ribbons

Development of Wear and Corrosion Resistant Plasma Sprayed Low Chromium Containing Fe-Based Amorphous/ Nanocrystalline Protective Coating

Study of Some Complex Metallurgical Systems by Computational Intelligence Techniques

Study of the Catalytic Characteristics of Mechanically Alloyed Nanocrytalline Nickel Aluminides in H2o2 Decomposition

Effect of Cooling Rate and AI Content on Microstructure, Mechanical Properties and Oxidation Behavior of (Ni0.92Zr0.08)100-xAlx (0 ≤ x ≤ 4 at.%) Nano–/Ultrafine Eutectic Composites

CFD Study on the Gas Dynamics, Heat and Mass Transfer during Sponge Iron Production from Iron-Ore Coal Composite Pellets in Rotary Hearth Furnace

Development of Low Expansion and High Strength Aluminium Matrix Hybrid Composites

Effect of Microstructure and Texture on the Mechanical and In-Vitro Bio-Corrosion Properties of Mg-Zn-Ca-Mn Alloy for Biomedical Applications

Relative Effect of Boron and Nitrogen on Creep Properties of Modified 9Cr-1Mo Steel Base Metal and Simulated Heat Affected Zone

Influence of Alloy Composition and Microstructure on Strength-Impact Toughness Combination of Steels for Strategic Applications

Aluminium Based Nanocomposites Developed By Mechanical Alloying And Non-Contact Ultrasonic Casting

Creep Behavior of Hot Rolled Powder Metallurgy Processed Al-SiCp Composites

Nano-Intermetallic/Ceramic Dispersed Al-Based Amorphous/Nanocrystalline Matrix Composites Synthesized By Mechanical Alloying

Some studies on the mushy state rolling of Al-4.5Cu alloy based in-situ composites reinforced with TiB2 or TiC particles

Structure-Property Relationships in Nb-Si-Mo alloys

Non-Isothermal, Isothermal and Cyclic Oxidation Behaviour of Mo-Si-B and Mo-Si-B-Al alloys

Mathematical Modeling of Metal Droplet Impingement on a Substrate and its Experimental Validation

Development of Tungsten Heavy Alloys Through Mechanical Alloying Route

Synthesis of Carbon Fiber Reinforced Silicon Carbide Composites by Soft-Solution Approach

Kinetics and Mechanism of Thin Halide Film Growth on Silver at Low Temperatures

Optimization of Hydrometallurgical Processing of Lean Manganese Bearing Resources

Multiphase Flow Numerical Modelling for Simulation of the Injection Stage of Powder Injection Moulding (PIM)

A Model of Thermal Conductivity of Nanofluids and its Experimental Validation

Crack Growth Around Fatigue Threshold of Low-Carbon Ferrite-Bainite Steels

Synthesis and Characterization of Pulse Electrodeposited Ni-CeO2 Nanocomposite Coatings

Mechanical Properties and Tribological Behaviour of Carbon Fibre Reinforced Composites with Carbon, Phenolic or Epoxy Matrices

Synthesis and Characterization of Ceria Reinforced Copper Matrix Nanocomposite Coatings

Monotonic and Cyclic Fracture Behaviour of AISI 304LN Stainless Steel

Influence of Pre-strain and Gradient Microstructure on Wear Behaviour of Plain Carbon Steels

Structural, Magnetic, Magnetoresistance and Optical Properties of Chemically Synthesized Rare-Earth...

Effect of Process Parameters on Mechanical Properties of AISI 4335 Steel

Synthesis and Characterization of Nickel, Titanium and Nickel-Titanium Thin Films by Magnetron Sputtering...

Studies on Austempering of High Carbon Low Alloy Steel for Enhanced Strength and Toughness

Preparation and in vitro Characterization of Zirconia and Alumina Based Bioceramics

Processing and Characterisation of Aluminium - Scandium Alloys and Composites

Mechanical Activation and Reactivity of Aluminium Oxyhydroxide Minerals

Bake Hardening in Low and Medium Carbon Steels

Microstructure, Mechanical Properties and Oxidation Behavior of Some Tungsten Alloys

Deformation behavior of ribbons of Copper-Zirconium based metallic glass with nanocrystalline precipitates...

Development of Ceria Reinforced Lead Free Tin Based Nanocomposites By Pulse Co-electrodeposition Technique

Accumulation of Ratcheting Strain in Polycrystalline Metallic Materials

Effect of Annealing on Texture Evolution and Oxide Formation in Nanocrystalline Nickel-Iron Alloys

Effects of Microalloy Precipitates on Austenite Grain Growth during Reheating Treatment of HSLA Steel

Atomistic Simulations of Methane Hydrates and Inhibitor Design

Structural Studies on Tempering Behaviour of Silicon Steels

The Study of the Possibilities and Conditions of Reduction of Zirconium Dioxide by Magnesium in Various Gaseous Media

Detection and Characterization of Defects by Eddy Current Testing Using Pattern Recognition Approaches

Pretreatment of High-Silicon Hot Metal by Soda Ash-Based Flux

Inhibitor Evaluation by Polarization Measurements as Influenced by the Position of the PZC

Behaviour of Copper Bearing Stainless Steels: Phase Transformation and Corrosion Characteristics

Vacuum Sintering of Self-Lubricating Bronze Bearings

Some Studies on Dependence of Pzc on Defect Structure of Metal Oxides and Dye Adsorption (Hamctehstks in Metal Oxide...

Studies on Packed and Fluidized Bed Reduction of Iron Ore Fines by Coal Fines

A Study on The Feasibility of Utilization of Low Grade Laterites for the Manufacture of Iron

Quantitative Studies on the Strengthning Characteristics of Various Aluminium Alloys by the Application...

Thermodynamics and Kinetic Studies on Sulfation of Some Metal Oxide and a Process Development on the Recovery...

Some Studies on the Sintering Characteristics of Hematite and Magnetite Concentrate in Presence of Alumina

Heat and Mass Tansfer during the Diffusion Melting of Iron and Steel in Iron Carbon Metal

Physico-Chemical Properties of Molten Blast Furnance Slags

Synthesis of MWCNT Reinforced AI-Si Nanocomposites by Microwave Sintering and Spark Plasma Sintering

A Study of the Mechanism of Stress Corrosion Cracking in Alpha Brass

Stress-Change Tests in the Study of the High Temperature Creep of Metals

High Temperature Oxidation Behavior of Tungsten Based Materials Processed by Powder Metallurgical Route

Processing-Microstructure-Property Correlation in an Aircraft Structural Application Alloy Ti-5Al-5Mo-5V-3Cr

Studies on Cast Al-Fe-V-Si Alloys

Some Studies on the Phase Transformation and Mechanical Behavour of Ti-Ni Shape Memory Alloys

Potentiosatic Anodic Polarization and Corrosion Rate Studies of Iron and some Alloy Steels in 1% H2SO4

Synthesis and Characterization of Tin Oxide and Zinc Oxide Based Thin Films and 1-D Nanostructures for Functional Applications

Studies on Hydrogen Enhanced Fatigue and Effect of Overload in a Cu-strengthened High Strength Low Alloy Steel

Trip Aided Steel for Automotives with Better Formability and Coating Behaviour

Laser Surface Engineering of AISI H13 Hot Work Tool Steel

Structure−Property Relations in Zirconium and Hafnium Diboride Based Ultra High Temperature Ceramic Composites

Studies on the Characteristics of Cast Binary Al-Li Alloys

A Study on Gas Permeation in Solids

Topochemical Sintering of Ba-and Sr-hexaferrites

Modelling of Eutectoid Transformation in Plain-Carbon and 1.41 Wt% Cr Steels

Synthesis and Characterization of Al-4.5wt%Cu/Zircon Sand Composite Produced by Stir Casting Route

Preparation and Structural Investigations of Y2O3 Dispersed Ferritic Steel

Reduction Efficiency of Iron Ore-Coal Composite Pellets in Tunnel Kiln

Surface Engineering of Steel Substrate through a Novel Cu-Sn Alloy Coating towards Improving Adhesion at Steel-Rubber Interface

Study of Mass Transfer Efficiency of Liquid Slag Injection as an Alternative Steel Refining Technique through Physical Modeling

Studies on Stress Corrosion Cracking of AISI 316 Stainless Steel in Polythionic Acid

Synthesis and Characterization of Ni-Ti, Ni-Ti-Hf and Ni-Ti-Cu Thin Films Deposited by RF/DC Magnetron Co-Sputtering

Lanthanum Gallate Based Electrolyte Materials for Solid Oxide Fuel Cell Application

Effect of Boron and Carbon on Microstructures, Mechanical Properties and Deformation Mechanisms of Beta Ti-15-3 Alloy

Data Driven Models for Indian Iron and Steel Making Operations

Synthesis of Negative Thermal Expansion Material Y2w3o12 and Fabrication of Low Thermal Expansion Cu/Y2w3o12 Composite

Microstructure and Deformation Behaviour of Nano–/Ultrafine Ti–Fe–(Sn) and Ni–Zr–(Al) Eutectic Composites

Studies on the Grain Refinement of Al-Cr, Al-Zr and Al-Si Alloys using Al-Ti-B Master Alloy

Optimisation of Cold Bonded Pellets and Study of Melting Behaviour of Pre-Reduced Composite Pellets

Studies on the Grain Refinement and Modification of some Hypoeutectic and Eutectic Al-Si Alloys

A Study on the Removal of Inclusions in Steels by Halide Salt Treatment and Filtration

Investigations on Kinetics & Mechanism of Reoxidation of Direct Reduced Iron

Studies on Nonisothermal Kinetics of Iron Ore Reduction

Sintering and Blast Furnace Iron Making — Theoretical and Experimental Investigations

Studies on Chromium White Cast Irons

Studies on wear characteristics of plain carbon hypo-eutectoid and eutectoid steels

Inclusions in 20Mncr5 Steel

Some Aspects of Discontinuous Transformations in Pu-Sn and Cu - Ag Alloys

Studies on Laser Assisted Composite Surfacing of Commercial Metals and Alloys for Tribological Application...

Studies on Mechanical Properties and Stress Corrosion Cracking of Generator Rotor End-Retaining Ring of 18nn - 4cr Steel...

Studies on The Mechanism and Kinetics of Discontinuous Precipitation & Coarsening in a Few Zn-Rich Binary Alloys

Deformation Induced Transformation of Retained Austenite in Trip Aided Steels

Mathematical Modeling of Twin-Roll Strip Casting of Al-33Cu and Its Experimental Validation

Microstructure-Property Relationships in Mushy State Rolled in-situ Al-4.5Cu-5TiB2 Composite

On the Formation of Aluminum Carbide in Aluminium/Silicon Carbide Particulate Composites

Processing and Characterization of Low Modulus Biocompatible Titanium Based Alloys

Processing and Structure-Property Relations of Ni-Tin Nanocomposite Thin Films Deposited by Reactive Magnetron Co-Sputtering

Processing of Particulate Metal Matrix Composites with Intensive Melt Shearing

Some Studies on Copper Containing Interstitial Free Steels

Some Studies on Reduction Kinetics of Iron Ore – Graphite Composite Pellets...

Synthesis and Characterization of Bulk Metal Matrix Nanocomposites Prepared ...

Surface Engineering of Sae 52100 Steel

Synthesis, Characterization and Modeling of Nanofluid for Advanced Heat Transfer Applications

Surface Treatment of Ti-6al-4v for Bio-Implant Application

Copper Matrix Nanocomposite Coating for Electrical Contact Application by Pulse Reverse Electrodeposition

Effect of Nature and Morphology of Discontinuous Reinforcement on Structure-Property Behaviour of Alumina Matrix Composites

Studies on Titanium Carbide Reinforced Ferrous Composites Prepared by Plasma mSmelting of Ilmenite Ore

Studies on the Kinetics and Mechanism of Some Invariant Reactions in Binary Systems

Studies on the Strengthening in Fe-Ni-Mn Alloys Containing Mo, Co, Al, Ti Etc.

Experimental and Theoretical Studies on Particle Distribution in Cast Aluminium- Based Metal Matrix Composites

Quantitative Study on Superplastig Behaviour of Some Tn-Ai Eutectoid/Near-Eutectqid Alloys...

Erosion-Oxidation Interaction for Ni and Ni-20cr Alloy

Some Studies on Aluminium Matrix in-Situ Composites Produced by Chemical Reactions

Influence of Short-Circuiting and Static Charge Supply on the Oxidation Kinetics of Cu, Cu-Li...

Dephosphorization of High Carbon Ferromanganese Using Baco3 Based Fluxes

Studies on the Thermo-mechanical Processing of Al-5Ti and Al-5Ti-lB Master Alloys used for the Grain Refinement...

A Study on Recrystallization Behaviour and Mechanical Properties of Some Aluminium Packaging Alloys

Studies on Isothermal and Nonisoothermal Production of Iron Ore Fines Surrounded by Coal Fines

Studies on the Cement-Bonded Briquettes of Iron and Steel Plant By-products as Burden Material for Blast Furnaces

A Study on Reduction-Smeltingof Chromite

Kinetics of Oxidation of Copper and its alloys at low and Intermediate Temperatures

Studies on the Dissolution of Second Phase in Alloys

Study of Mill Diagnostics by Vibration Signature Technique

Studies on Compositionally Graded Thermal Barrier Coatings Developed by Thermal Spraying and Pulsed Laser Deposition

Effect of Microstructure and Crystallographic Texture on Impact Toughness in Low Carbon Ferritic Steel

Development of Novel Thermal Barrier Coating for Gas Turbine

Production of a-Silicon Nitride and Silicon Oxynitride from Rice Husks

Hydrogen Embrittlement of HSLA-80 and HSLA-100 Steels in Seawater under Cathodic Charging Conditions

A Study of Mechanism of Carbon Oxidation Reaction in Iron-Carbon Melts

Synthesis and Characterization Of TiC/ZrC Reinforced Iron-Based Composites

Processing and Characterisation of Aluminium Base Short Steel Fiber Reinforced Composites

Processing and Characterization of Advanced Zinc-Aluminium Based Alloys

Studies on Development of Al-Based Amorphous Alloys or Nan O-Intermetallic Dispersed Amorphous Matrix ..

Composite by Mechanical Alloying

Study and Control of Properties and Behaviour of Various Sand Systems Used for Metal Casting ...

by Application of Statistical Design of Experiments

The Effect of Creep Stress on Carbide Reactions During Tempering of Alloy Steels

Chemical and Metallurgical Factors Affecting the Failure of Metals and Alloys under the Combined Action of Stress and Corrosion

Studies on Stress Corrosion Cracking and Mercury Cracking in Brasses

Studies on Microstructure and Mechanical Properties of Tungsten Inert Gas and Electron Beam Welded Grade 91 Steel

Genetic Algorithms Based Optimization Of Phase Transformation Cycle Evolved Using Cellular Automata

Microstructure Property Relationship in Thermo Mechanically Processed Austenitic Manganese Steels and Composites

Structure-Property Relationships in Nb-Si-Cr and Nb-Si-Ti Alloys

High Temperature Behaviour of Welded Powder Metallurgy Parts

Studies on Some Characteristics of Cast Fe— Mn— Al Alloys

Kinetics of Decarburization of Iron-Chromium Melts In Oxidizing Atmosphere

Creep Strengthening of Metals

Development of Ore-Coal Composite Pellets and Investigations on Their Reduction Behaviour

Mathematical Modelling of Reduction of Iron Ore in Rotary Kiln

Effect of Pre-Treatment on the Quenching and Tempering Characteristics of High Carbon Steels

A Study on the Effects of Certain Minor Additives on Solidification and Graphitisation in White Cast Iron

Studies on Production of Water Atomized White Cast Iron and Iron Powders from Sponge Iron Fines and Composite Manufacturing

Characterisation of Retrogression and Reaging Behaviour of 8090 and 1441 Al-Li-Cu-Mg-Zr Alloys...

Kinetics of Electrode Processes of Sulphides in Aqueous Solutions and Direct Electrowinning of Lead...

Studies on Dephosphorisation of Steel under Conditions of Industrial Relevance and Desulphurisation of Cast Iron...

using an Electrochemical Technique

On the Carbon Reduction of Iron Oxide Rich Slags

Residual Life Estimation in Fluctuating Loading

Synthesis and Characterization of Aluminium Matrix Micro and Nano Composites Reinforced by In-Situ Alumina Particulates

Synthesis of Nanostructure Multi-layered Ni/Ti Thin Film by Magnetron Sputtering and Effect of Annealing

Study of the Catalytic Characterization of Mechanically Alloyed Nanocrystalline Nickel Aluminides in H2O2 Decomposition

Some Studies on the Mechanisms and Kinetics of Mechanical Alloying

Dissolution of Cored Wire Additions in Steelmaking

Influence of deformation-zone geometry on deformation parameters and pressure in rolling wiht plain-barrel rolls

Surface Engineering Of Aisi 316l Stainless Steel For Bioimplant Application

Surface Modification And Coatings on Titanium Based Alloy (Ti-6al-4v) for Bioimplant Application

Studies on Kinetics of Fluidized Bed Roasting of High Goethetic Indian Iron Ore Fines

High Temperature Creep Behavior of Welded P91B Steel

Development of NiCrSiB Coating on AISI 304 Stainless Steel for Hot Corrosion...

Processing, Structure and Properties of Silica Foams

Studies on Some Characteristics of Austempered Ductile Irons

Influence of Variation in Alloy Microstructure on the High Temperature Oxidation of 2.25cr-Lmo and 9cr-Lmo Steels

Structure-Property Relationship in Vanadium, Niobium and Titanium Modified 9% Chromium Heat Resistant Steel

Metallurgical Studies for the Development, Characterisation and Evaluation of an Improved

Initiation and Growth of Cracks Near Fatigue Threshold in Plain Carbon Steels

Synthesis and Characterization of Nanocrystalline Silicides by Mechanical Alloying in Fe-Ni-Si System

Effect of Monotonic and Cyclic Loading on the Fracture Behaviour of Sa 333 Steel

Some Studies on Laser Surface Alloying of 304 Stainless Steel with Molybdenum and Copper with Chromium

Study on the Ferrite Grain Structure and Precipitation in Thermomechanically Tailored HSLA Steel

Studies on Microalloyed Grey Cast Irons and Austempered Ductile Irons

Study of the Phase Transformation Characteristics in Some Copper Bearing Hsla Steels

Synthesis and Characterization of Creep Resistant Sn-Cu-Y2O3 Nanocomposite Lead-Free Solder Synthesis and Characterization...

A Density Functional Theory Based Study of Lanthanum Nickelate

High Temperature Cyclic Deformation Behaviour of Polycrystalline Nickel Based Superalloys

Development of High Alumina Bricks Using Reactive Mullite and Zircon Flour as Additives

Environmental Degradation of FRP Composites

Kinetics of Densieication of Powder Compacts During Non-Isothermal Sintering

Studies on Compaction, Oxidation and Slag Corrosion of MgO-C Refractories for BOF Application

Volume Fraction and Temperature Dependence of Particle Coarsening in Plain Carbon Steel

Synthesis of Aluminium Based Bulk Metallic Glasses via Mechanical Alloying and Spark Plasma Sintering

Investigation on the Kinetics of Growth of Thin Oxide Flims on Copper at Low Temperature

Production of Electrolytic Iron Powder From Sponge Iron Fines

Bare Bath Deoxidation Study on Low Alloy Steels in Electric Arc Furnace

Some Studies on Discontinuous Ceramic Phases Reinforced Magnesium/Aluminium Based Metal Matrix Cast Composites

Development of Aluminum-Alumina and Aluminum Alloy-Alumina Bulk Nanocomposites...

Effect of Stacking Fault Energy on the Evolution of Nanostructure and Mechanical Properties in Cu100-Xznx (0 ≤ X ≤ 30 Wt.%)...

The Relation Between Structure and Properties in Ti-6.5al-3.3mo-L.6zr-Q.3si Alloy

Studies on Aluminium Cast Irons

Sintering of Silicon Carbide

Precipitation and Magnetic - Ageing in Electrical Steels

Phase Transformations and Corrosive Wear Behaviour of Cr-Mn-Cu White Cast Irons

On the Grain refinement and Modification of Some Hypoeutectic Al-Si alloys

Multi-Scale Modeling of Thermal Conductivity of Nanofluids and Design of Silver, Nickel Aluminide Dispersed Aqueous Nanofluids

Strength and Fracture Behaviour of Spot Welds on Interstitial Free Steel Sheets