DSpace at My University: Mechanical Engineering

Mechanical Engineering Community home page

Browse

Collections in this community

Exact Solutions for Piezoelectric Energy Harvesters Composed of Laminated Composite Substrates

Temperature Rise at The Contact Between Sliding Surfaces with Micro and Nano Scale Roughness: Experiments and Analysis

Fabrication, Characterization, and Modelling of SWCNT, MWCNT, and F-MWCNT Reinforced EMA Polymer Nanocomposites

Stochastic Models in Design and Use of Machining Equipment

Influence of Fuel Volatility on Dynamics and Thermodynamics of Spray Combustion in a Gas Turbine Combustor

Studies on Multivariate Process Capability Indices Using Robust PCA and Computational Geometry

Finite Element Analysis of Impact-Induced Deformations, Stresses and Damages in Composite Laminates

Multi-Layered Structures of Highly-Filled Thermoplastic/Graphene Nanocomposites for Enhanced EMI Shielding

Grindability Studies of Ceramics and Ceramic Matrix Composites

Predictive Tools for Bead-Geometry, Cooling Rate, Micro-Porosity, Natural Frequency of Vibration and Residual Stress in Electron Beam Welded Stainless Steel Plates

Fluid Dynamics in Three-dimensional Branching Networks with Application to Model Human Bronchial Tree

Design Exploration of Underactuated Robotic Hands for Enveloping and Fingertip Grasps

Effect of Pulsatile Flow and Air-Damper on Liquid-Liquid Two Phase Extraction Operations

Flow and Heat Transfer over a Double Forward-Facing Step with Obstacles

New Kinds of Sommerfeld Effect in Rotordynamic Systems with Non-Ideal Drive

Exploration of Flashing in Stagnant Liquids and Analysis of Flashing Driven Natural Circulation Loops

Mixing in a Tundish

Transport and Thermodynamic Analysis of Micro Reactors

Dynamics of Jet Pumps with Specific Reference to Hydraulic Transportation of Solids

Role of Cryogenic Cooling on Machinability of Ti-6ai-4v Alloy

Numerical Simulation of Two-Fluid Flows with Sharp Interfaces Using Level Set Method

Vibration Analysis of Plates on Viscoelastic Foundations

Non-Boussinesq Effects in Natural Convection of Power-Law Fluids

Some On-Chip Applications of Alternating Current Electrothermal Flow

Analysis of Air Entrainment and Exit Temperature Suppression of an Infrared Suppression (IRS) Device

Some Aspects of Pressure Jet Combustion with Air Swirl

Entrainment of Air into a Louvered Funnel

Intelligent Computer-Aided Assembly Planning Methodologies for Mechanical Product Assembly Sequence Optimization and Robot Task Plan Generation

Laser Beam Welding of NiTinol: Experimental Study, Modeling and Optimization using Nature-Inspired Techniques

Solid Sintering of Copper and Copper-NaCl Mixture Using Friction Processing

An Investigation on Residual Stress in Grit-Blasted Substrates and Plasma Sprayed Ceramic Coatings

On Strategies and Decision Systems for Multi Sensor Based Tool Condition Monitoring in Face Milling

Studies on Natural Convection Heat Transfer in Fluid Filled Saturated Anisotropic Rectangular Porous Slab

Mixed-Mode Interlaminar Delamination Damage Evolution in Laminated FRP Composites

Development of Heat Transfer Model for Parametric Studies on Laser Deposition of Metals with Powder Feed

Analysis of Power System Transients Employing Wavelet Transform

Study of Elastohydrodynamically Lubricated Rolling Element Bearings Considering the Effect of Surface Roughness and Micropolar Fluid

Chemomechanics of Lithium-Ion Battery Anode Particles: Role of Geometry and Surface Effects

Evolution of Microstructure and Texture and Numerical Simulation of Hot Deformation of 304LN Austenitic Stainless Steel

Role of Counter Surface Topography on Wear of Polymers (A Semi-Analytical Model and Experimental Validation)

Design and Development of Intelligent Optimization Algorithm

Analysis of Non-Idealities of Interfacial Processes in Solid Oxide Fuel Cells and Lithium-Ion Batteries

High Temperature Wear Characteristics of Laser Surface Remelted and Stellite/WC Composite Cladded H13 Steel

Analytical Assessment of the Wetting Capability of MQL Supply and the Mechanism of Tool Wear in Micro-Milling

On some Design Aspects of a Novel Wave Generating Cam for Conventional Harmonic Drives with Involute Toothed Gear Set

Modelling and Dynamics of Epitrochoid Generated Orbital Rotary Piston LSHT Hydrostatic Motor and Transmission System

Studies on Status of Global Foundry Industry and Development of a Framework for a Holonic Casting Manufacturing System

Natural Convection and Radiative Heat Transfer from Helical Coils: Insights into Heat Transfer Dynamics

Hydrodynamic Study of Granulation of Slag in Spinning Disc Atomization Using a Novel Air Blast Method

Development and Application of a High-Order Accurate Meshless Method to Thermo-Fluid Problems in Complex Geometries

Dynamical Modelling of Electrical Assets for Real-Time Fault Diagnosis and Data-Driven Prognosis

Detection, Localization and Classification of Certain Rail Track Defects from Axle-Box Acceleration Measurements

Automatic Determination of the Neutral Curve of Linear Stability of Steady and Time-Periodic Flows Using Pseudo-Arclength Continuation

Dynamics of Parametrically Excited Micro-Cantilever Beam-Type Mass Sensor

Acoustical Study of Periodic and Gradient Based Sonic Crystals Based On Rigid and Cladded Resonators

Modeling, Simulation and Control of a Solid Oxide Fuel Cell System : a Bond Graph Approach

On Strategies and Decision Systems for Multi Sensor Based Tool Condition Monitoring in Face Milling

Thermomechanical Finite Element Analyses and Experimental Investigations on Angular Distortions and Weldment Characteristics of Arc Welded Joints

Improvements in Chemo-Mechanical Modelling of Lithium-Ion Battery Anode Particles: Interfaces, Non-Axisymmetric Growth, and Instability

Improved Micromechanical Modelling by Incorporation of Varying Stresses in Individual Inclusions within Mean-Field Homogenization Framework

Analysis of Smart Constrained Layer Damping of Laminated Composite Structures Using Mesh free Method

Monitoring and Analysis of Mechanical as Well as Laser Forming of Metal Foams

New Approaches in Data-Driven Structural Health Monitoring

Investigations on Buoyancy Induced Circulation Loops

Three-Dimensional Finite Element Analysis of Heat Transfer in Arc Welding

Design and Analysis of a Flexure-Based 6-Dof Compliant Parallel Micromanipulator

Performance Evaluation of Railway Vehicles with Worn Wheels

Hematology on a Compact Disc via Interplay of Rotational and Capillarity-Driven Interactions

Effects of Dilution on the Combustion and Emission Characteristics of Kerosene Fuel

Analysis of Unique Transport Processes in Magneto-Fluidic Systems Using Continuum-Based and Particle-Based Approaches

Heat Transfer in Presence of Electro Magneto Hydrodynamic Interactions in Narrow Confinements

Steady State and Dynamic Behaviour of Lubricated Roller Bearings

Laser-Based Additive Manufacturing of Graded Porous Implant and Surface Modification of Ti6Al4V for Improvement of Biofunctionalities

Improving the Titanium and Stainless Steel Similar and Dissimilar Welding by Nonconventional Energy Sources and Processes

Burr Formation in Micro-Machining and Ultrasonic-Assisted Abrasive Micro-Deburring

High Speed Grinding of Ti-6Al-4V Using Electroplated cBN Wheel

Heat Transfer, Emission Characteristics, and Thermodynamic Exergy Balance of Impinging Flames on Plane and Curved Surfaces

Analysis of Externally Pressurized Air Journal Bearings

Theoretical Investigations on the Effect of Velocity Slip on Steady State Performance of Externally Pressurized Porous

Evaluation of CO2 Based Sub- and Transcritical Refrigeration Systems for Air-Conditioning Applications

Multiscale Characterization and Modeling of 3D Printed Short Fiber Reinforced Thermoplastic Polymer Composites

Wave Propagation in Elastic and Viscoelastic Media with Frictional and Imperfect Interfaces

Studies on a CO2 Based Summer Air Conditioning System with Single and Multiple Expansion Valves

Smart Damping of Geometrically Nonlinear Vibrations of Omposite Plates and Shells Using Fractional Derivative Constitutive Model of Viscoelasticity

Conjugate Natural Convection from Horizontal and Vertical Thick Hollow Cylinder

Some Studies on Laser Transformation Hardening

Flow Instabilities Inside a Nozzle

Stability Analysis of Long Hydrodynamic Journal Bearing of Circular Cross-Section Lubricated with Magnetomicropolar Fluid

Investigation of Solid Lubricious Coatings Deposited by Laser and In-House Developed Laser Assisted Cold Spray Setup

Failure Analysis and Stress Distribution in Tailored Lap Joints: A Computational and Experimental Study

Fabrication of Micro End Mill Tools Using Sequential EDM Process and Its Performance Analysis

Studies on Transcritical CO2 Based Cooling and Heating Systems with Ejector

Model–Based Fault Diagnosis and Prognosis of Hybrid Dynamical Systems

Numerical Studies on Complex Solidification Andmelting Systems with Low Prandtl Number

Sommerfeld Effect in Motor-Driven Machines and Mechanisms

Dynamics of Electrically Stressed Drops: Deformations, Migrations and Interactions

Studies on Compression-Absorption Systems for Heating and Cooling Applications

Dynamics of Cellular Suspensions in Bioengineered Microfluidic Confinements: Perspectives from Physiology-On-Chip to On-Chip Medical Diagnostics

Enhancing Defrost Efficiency in Domestic Refrigerators: Integration of Natural Circulation Loops and Heat Transfer Optimization

Online Monitoring of Thermal Signal and Its Application in Feedback Control during Laser Cladding and Laser Additive Manufacturing Processes

Investigation into the Acoustics of Microperforated Panel Absorbers

Modelling of Curing of Fibre Reinforced Composite with Porosity Defects and Experimental Validation

Pulsatile Flow Features in Model Aortic Conduits in Presence of Mechanical Heart Valves

Resistance Spot Welding of Similar and Dissimilar Sheet Materials with Carbonaceous Interlayers

Shape Effect on Natural Convection Heat Transfer from a Constant Surface Area Vertical Solid or Hollow Frustum

Development and Characterization of Functional Coatings over Metallic Implant Surfaces for Improved Bio-functionalities

Laser Remelting of Thermally Sprayed Alumina and Chromia Coatings

Parametric Optimization and Weld Zone Characterization of Fiber Laser Welded SS304 and SS316 Sheets of Sub-Millimeter Thickness

Numerical Investigations on Enhancement of Pool Boiling Heat Transfer Employing Lattice Boltzmann Method (LBM)

Natural Convection Heat Transfer from Branching Fins

Vibrations of Rotating Pretwisted and Tapered Blades

A Numerical Investigation on Spray, Combustion, and Emission Characterization of Direct and Port-Injected Dimethyl Ether-Fueled Compression Ignition Engines

An Experimental Study and Molecular Dynamic Simulation of Friction Stir Spot Welding of Aluminum and Copper for Battery Pack Applications

Some Aspects of Swirl Spray Atomizing Nozzles

Wear Modelling of 90 Degree Bed Conveying Air-Solid Mixture: Under Interference Conditions Due to Connecting End Pipes

Forming and Crushing Performance of Laser Welded Tailored Blanks of Extra Deep Drawing Steel Sheets

Development of Novel Hybrid-Trefftz Finite Element Models for the Analysis of Laminated and Smart Composite Plates and Doubly Curved Shells

Inflation and Stability of a Flat Hyperelastic Toroidal Membrane Structure

Surface Tension Gradient-Driven Dynamics of Droplets in an Incipient Flow

Natural Convection Cooling of Infrared Suppression (IRS) Devices

Failure and Formability Analyses of Pre-Strained Anisotropic Thin Sheets

Thermo-Capillarity Induced Transport Phenomena in Microfluidic Domains

Formation and Evolution of Liquid Droplets and Direct Contact Condensation of Vapour Bubbles in an Immiscible Liquid

Stresses around Free and Pin-Loaded Holes in Filamentary Composites Laminates

Prediction of Load and Metal Flow in Axisymmetric Extrusion Forging

Electro-Mechanics of Complex Matter – From Dilute Polymers to Human Body Fluids

Mechanics of Fluid-Filled Elastomers for Periodic and Random Microstructures with Aligned Circular Pores

Integrated Thermo-Mechanical and Metallurgical Model of Friction Stir Welding of Pipes

Forming Behavior of Solution Treated Inconel-718 Sheets at Room and Elevated Temperatures for Aerospace Applications

Formability of Ultra-Thin Sheets and Fabrication of Serpentine Shaped Micro-Channels by Stamping and Hydroforming Processes for Battery Applications

Optimized Time Delay-Based Sound Source Localization Method for Impulsive Sources

Numerical Study of Hemodynamics in Healthy and Diseased Arteries under Different Physiological Conditions

Role of Tailored Residual Stress on Control of Burr Formation in Micro End Milling: Experiments and Numerical Modelling

Investigations on Thin Film Evaporation and Boiling in Microchannels Pertaining to Miniature Heat Dissipating Devices

Analyses of Substrate-Mediated Nucleation and Experiments on Subsequent Surface Icing

Static and Dynamic Mechanical and Corrosion Properties of Powder-Bed Laser-Fused Precipitation Hardening Stainless Steel

Numerical and Experimental Studies on Natural Circulation Loops Based on Supercritical Carbon Dioxide

Warm Forming of Aluminium Alloy Sheets and Formability Improvement in Nonisothermal Redrawing Process

Experimental Studies on Entrainment at Liquid-Liquid Interface Due to the Movement of a Third Phase

Sommerfeld Effect Characterisation in Complex Rotor Dynamic Systems with Non-Ideal Drive Through Semi-Analytical Methods

Large Eddy Simulation of Incompressible Turbulent Planar Single and Parallel Jets

Experimental Study on Alumina and Iron Oxide Nano Fluids in Natural Convection Cavity With and Without Rotary Magnetic Field

Theoretical and Experimental Study of Influence Function in Magnetorheological Fluid-Based Finishing of Oxygen-Free High Conductivity (OFHC) Copper

Natural Convection Heat Transfer from a Horizontal, Vertical, Solid or Hollow Cylinder: A Numerical Approach

Thermoelastic Analyses of Interlaminar Delamination Growth Behaviour Emanating from Free and Pin-Loaded Holes in Laminated Frp Composites

Analytical Modeling of Transport Processes in Non-Newtonian Sisko Fluids and Third Grade Fluids

Numerical Investigations on Transport Phenomena in Thin Vapour Chambers for Electronics Cooling

Analysis of Elastic and Coupled Flexo-Physics Problems using Generalized Strain Gradient Theories

Manipulation of Droplets by Electrostatic Actuation and the Related Hydrodynamics

Lathe Rigidity and Machining Accuracy

Dynamic Behaviour of Shape Memory Alloy Oscillator under Harmonic Excitation

Underwater Acoustic Source Identification and Localization in a Reverberant Environment

Preparation and Characterisation of Thermally Sprayed Diamond Reinforced Bronze and Molybdenum Coatings

Estimation of External Forces in Dynamic Systems Using Deterministic-Stochastic Techniques

Uniaxial Tensile Strength and Susceptibility to Intergranular Corrosion of Hastelloy C-276 Sheets Welded by Ytterbium-Fiber Laser Beam and Electron Beam

Development of Friction Based Solid State Processing Strategies for the Surface Modification of Aluminium Alloys

Friction Stir Lap Welding of AA6061-T6 and AISI304 in Air and Underwater Media: Mechanical Studies and Material Characterizations

Dynamic Evolution of Gas-Liquid Interfaces During Bubble Bursting, Bubble Coalescence and Entrainment at the Free Surface By Rotary Rollers

Electrically Modulated Dynamics of Suspended Drops and Emulsions

Microfluidic Transport and Complex Interfaces: Perspectives of Drops and Lipid Vesicles

Experimental Investigation on Electrochemical Micromachining of Nitinol Shape Memory Alloy

Microstructure and Formability Analyses of Tailor Welded Blanks of Commercially Pure Titanium and Ti6al4v Alloy Sheets

On the Surface Micro-Mechanical Properties of Polymers

Metro Coach Dynamics Study Using Field Trials and Simulations towards Improving Ride Quality and Safety

Monitoring of Molten Pool Thermal History and Its Significance in Laser Cladding of Inconel718 Based Composite Coatings

Electrokinetics in Randomly Interconnected Porous Matrix and Its Perspective in Microfluidic Applications

Wave-Induced Transport of a Particle on a Flexible Surface

Transport of Complex Fluids through Micro Confinements

Ultra-High Finishing of HVOF Sprayed WC-Co Coating

An Inquest into Inter-Chamber Leakage through Ideally form-Closed Contacts between Star and Ring in GEROTOR Pump and ORBIT Motor

Natural Planar Hydraulic Jumps in Laminar and Turbulent Flow: Theoretical, Numerical and Experimental Study

Modelling and Control of a Pneumatically Actuated Continuum Manipulator under the Effect of Hysteresis

Atmospheric Plasma Sprayed Metal Oxide Coatings: Understanding on their Sensing and Catalytic Conversion Characteristics of Toxic Gases Relevant to Air Quality Monitoring

Electrically Modulated Interfacial Dynamics: Perspectives from Inert Droplets to Active Microswimmers

Coupled Dynamics of Pantograph-Catenary System during Multiple Pantograph Operation

Instabilities in Rotationally Actuated Micro-Scale Flows

Development of Closed Loop Pulsating Heat Pipes for Application at Elevated Evaporator Temperature

Composite Coatings of Carbonaceous Nanomaterials on Aluminium Substrates by Solid State Processing

Numerical and Experimental Investigation of Buoyancy Induced Convection in High Porosity Media

Fabrication of Longitudinal Friction Stir Welded Aluminium Tubes: Evaluation of Formability and Crushing Performance

Data-Driven Diagnosis and Prognosis of Faults in Rotating Machinery

Multi-Objective Optimization of Electrochemical Micro-Drilling of Ti6Al4V Using in Situ-Fabricated High Aspect Ratio WC Micro-Tool

Parallel Sliding Lubricated Contact with Positive Deterministic Surface Textures

Gas-Solid Two-Phase Flow in Sudden Expansion Pipes, Diffusers and Orifices- A Computational Study

Wave Induced Transport of Particles and Extended Bodies

Fabrication of Flexible Abrasive Tools and Their Performance Evaluation for Finishing Different Materials

Static and Dynamic Behaviour of Piezoelectric Structures in Presence of Crack

Laser Additive Manufacturing of Friction Stir Welding Tools for High-Temperature Materials and Laser Shock Peening for Improving Weld Quality

Electrohydrodynamics of Droplets in Confined Fluidic Environment

Bone Ingrowth and Remodelling Around a Porous-Coated Femoral Implant

Large Eddy Simulation of Incompressible Turbulent Flow Inside Lid-Driven Cavity

Surface Modification With Powder Metallurgy (P/M) Electrodes In Electrodicharge Machine

Modeling and Dynamics of Railway Vehicles: A Bond Graph Approach

Modelling of Moulding Sand Systems Using Conventional Regression Tools and Neural Network-Based Approaches

On Some Aspects of Room Airflow Simulations

Some Studies on Multi-Phase Transport Phenomena in Multi-Component Alloy Solidification Processes

Study on Different Strategies for Soft Computing-based Drill Wear Monitoring using Multiple Sensors

Some Studies on Parametric Instability and Control of Composite...

High Efficiency Deep Grinding of Bearing Steel and Modelling for Specific Energy Requirement

Circulation Flow And Mixing In Rh Degasser

Design and Development of Adaptive Motion Planners for Wheeled Robots

Development of High Performance Titanium Nitride Coated Carbide Inserts Using Closedfield Unbalanced Magnetron Sputtering

Natural Philosophy of Thermodynamic Optimization

New Conservation Integrals For Circular Arc Crack And Computational Verifications

Two Phase Flow Pressure Drops in Sudden Contractions and Expansions

Model Based Fault Diagnosis of a Rotor System for Unbalance, Misalignment and Crack

Development and Machining Performance of Titanium Nitride-Molybdenum Disulphide Composite Coated Tools...

Design and Control of a Piezoelectric Actuated Bio-inspired Compliant Robotic Microgripper

Carbon dioxide based natural circulation loops: Application to refrigeration and air conditioning systems

Natural, Forced, and Phase-Change Convective Transport in Microchannels

Heat Transfer Model for Laser Cladding with Powder Feed

Some Studies in Metal Forming with Underwater Explosion Bubbles

On The Mechanics of Stick Slip Motion and It's Elimination

Multi-Sensor based Monitoring and Modeling of Pulsed GMAW Process

Development of Aluminium Oxide-Titanium Boride-Titanium Nitride Composite Coating...

Characterization and Performance Evaluation of Ceramic Composite Coatings Synthesized by Laser Cladding...

Experimental Investigations and Input-Output Modeling of Electron Beam Welding Process...

Adhesion Failure and Delamination of Bonded Tubular Joints Made with Laminated FRP Composites and Functionally Graded Materials

Sommerfeld Effect in Internally Damped Shaftrotor Systems

Modeling and Simulations of Six-legged Walking Robots: Analytical and Soft Computing-based Approaches

Convection and Centrifugal Instability

Creep Analysis of Cr-Mo-W-V Steels and their Components

Machinery Signature Analysis using Hilbert Huang Transform

Bond Graph Aided Trajectory Tracking and Impedance Control of Parallel Manipulators

Design, Development, Fabrication and Performance Evaluation of a Micro-Electrochemical Machine

Characteristics of Single-Phase and Two-Phase Natural Circulation Loops – Experiments and Analyses

Development of Aluminium Based Metal Matrix Composites by Direct Metal Laser Sintering Technique and Their Characterisation

Interfacial Transport in Rotationally Actuated Microfluidic Devices

Studies on Total Quality Management in Indian Manufacturing Firms

Synergy of CFD, experimentation and soft computing techniques for modelling, optimization...

Forward and Reverse Modeling of Plasma Spray Coating Process: Experimental Observations, Statistical Analyses...

Finite Element Modeling of Chip Formation during Orthogonal Machining

Laminar Forced Convection with Viscous Dissipation in Hydrodynamically and Thermally

Modeling and Simulations of Robotic Systems Using Soft Computing

Numerical and Experimental Studies on Subcritical/Supercritical Carbon Dioxide Based Natural Circulation Loops

Laminar Forced Convection with Viscous Dissipation in the Entrance Region of Annuli Subjected to Constant Temperature

Micromechanical Analysis of Novel Continuous and Short Fuzzy Fiber Reinforced Composites

Studies on Two-Phase Flow Phenomenon in Subsonic Aerothermopressor Coupled to Gas Turbine

A Numerical Model and Experimental Investigations for Laser Drilling Process

Laminar Slot Jet and Slot Jet Impingement Heat Transfer

Some Vibration Problems in Machine Tools

Some Studies in Stress Distribution in Pressure Vessels and in Gear Teeth

Fluid Flow and Heat Transfer by Impinging Jets

Statistical and Economic Designs of Multiple Stream Process Control Charts

Performance Characteristics of Plain and Porous Metal Journal Bearings in Turbulent Regime

Studies on Long Term Average Optical Efficiency for Principal Solar Collectors and Shading Factors for Windows

Thermal-Hydraulic Phenomena in Laser-Material Interactions

Some Aspects of Pressure Atomizing Nozzles

Studies on Axial and Fin Heat Transfer in Circulating Fluidized Beds

Prediction by the Finite Element Method and Experimental Verification of the Temperature Histories in the Submerged Arc Welding

Theoretical Analysis of Conical Whirl Instability of Unloaded Porous Journal Bearings Including the Effect of Velocity Slip

Fluid Flow and Heat Transfer by Slot Jet Impingement on Two-Dimensional Bodies

Turbomachine Blade Vibration

Dynamic Analysis of Mechanisms Containing Flexible Links

Some Investigation on Externally Pressurized Flexible Circular Thrust Bearing

Finite Element Analysis of Corner Joint in Framed Structures

Some Analytical Studies of Series Production Systems with Variable Operative Times

Gas-Solid Flows in Pipes and Jets: A Computational Investigation

Electron beam welding of similar, dissimilar and reactive metals:Experimental studies,modeling and analysis

Biomechanical Analyses of the Pelvic Bone and Optimal Design Considerations for Uncemented Acetabular Prosthesis

Numerical Simulation of Turbulent jet Flow Over Oblique Wall

Vibration and Noise Generated by Ball Bearing

Metal Transfer in Arc Welding with Coated Electrodes

Effect of Pulsation and Swirl on Combustion in Fuel Beds

Some Aspects of Evaporation and Condensation over Small Scales

Inflation Mechanics and Dynamics of a Hyperelastic Toroidal Membrane

Condition Monitoring of Submersible Pump Using Motor Current Signature Analysis

Studies on Friction Stir Welding of Naturally Aged 6063 Aluminium Alloy

Simulation of Flow and Heat Transfer in Non-Newtonian Fluids Inside Cavities by Lattice Boltzmann Method

Studies on Ammonia Based Solid Sorption Refrigeration Systems

Hydrodynamic Lubrication in Parallel Sliding Textured Surfaces (with inertia, slip and turbulence effects)

Balancing of Flexible Rotors

Stress Analysis of Some Welded Joints

Design of Multivariate Statistical Process Control Chart with Statistical and Economic Approaches

Finite Element Analysis of Heat Conduction and Thermal Stresses in Laminated Composite Plates

An Investigation of a Surge Cycle

Analysis and Synthesis of Sheet Metal Forming by Laser Heating Using Finite Element Method and Soft Computing

Modal Damping Prediction for Vibrating Solids: Constitutive Models and Finite Element Computations

Analysis of Composite Plates with Distributed Piezoelectric Sensor and Actuator Layers

Economic Design of Attribute Control Charts for Multistage Production Systems

Robust Control of Nonholonomic Systems With Multi-Sensor Fusion Data

Processing and Characterization of Mullite Coating Obtained by Plasma Spraying of Zircon-Alumina Powder Mixture

Study of Incompressible Turbulent Flow inside Lid-Driven Cavities using Large Eddy Simulation

Dynamic Behaviour of Externally Pressurised Multi Recess Oil Journal Bearings

A Study on Dynamic Behaviour of Hydraulic Servomotor with Asymmetric Actuator

Numerical Simulation of Room Airflow

Economic Design of X Control Charts with Uncertainty in Cost and Process Parameters Using a Risk Minimization Approach

Stiffness and Damping Characteristics of Externally Pressure of Externally Pressurised Porous Gas Journal Bearings

Stability of Nonuniform Cantilever Beams Subjected to Nonconservative Forces

Stress Corrosion Studies on Alpha-brass and Copper Maganese Alloys

Static and Dynamic Characteristics of Finite Porous Oil Journal Bearings Considering Tangential Velocity Slip

Dynamic and Jump Characteristics of Cam-Follower Systems

Residual Stresses in Welding: Some Experimental and Numerical Studies

Electrically Modulated Contact Line Dynamics of Immiscible Binary Fluids

Effect of Taper on Uncoupled Natural Frequencies of Cantilever Beams

Longitudinal Vibration of Stepped Bars

Multi-Scale and Multi-Phase Transport in Microfluidic Systems

Extension of Lagrangian-Hamiltonian Mechanics, Study of Symmetries and Invariants

Theoretical Studies on Metal Hydride Based Systems for Hydrogen Storage and Water Pumping

Development of Multi-Component Composite Coating on Ti-6Al-4V Substrate ...

Grindability Study of Inconel 718 Using Galvanically Bonded Monolayer Cbn Wheel

Thermal Comfort and Comfort Standards for Naturally Ventilated Classrooms in Hot Humid Climates

Investigations on Nanofluid Based Thermal Engineering and Magneto-Rheological Applications

Computational Study of wall-Bounded Flow and Heat Transfer Using Low-Reynolds Number Turbulence models

Analytical and Numerical Models for Vibro-Acoustic Studies of Thin Isotropic Rectangular and Circular Cracked Plates

Analysis of Active Contacts in Epitrochoid Generated Form Closed Rotor-Stator set with specific reference to Hydrostatic...

Fabrication and Performance Evaluation of on-Chip Micro Heat Pipe

Signal Processing Techniques on Rotary Optical Encoders for Fault Detection in Rotating Machines

Tool Condition Monitoring Using Digital Image Processing

Active Control of Geometrically Nonlinear Vibrations of Magneto-Electro-Elastic Plates and Shells

Vibration Isolation Using Magneto-Rheological Fluid Based Dampers

Studies on Inventory, Maintenance and Joint Inventory-Maintenance Models Using Non-Traditional ptimization Tools

Formability Analysis of Laser Welded Dual Phase Steel Sheets for Auto-Body Applications

Thermal Simulation Studies and Grain Growth Modelling of the Weld-Haz in Hsla-80/100 Steels

On Development and Performance Evaluation of Advanced Single Layer Brazed Cbn Wheel

Active control of geometrically nonlinear vibrations of smart laminated composite, functionally graded and fuzzy fiber...

Active Control of Geometrically Nonlinear Vibrations of Smart Skew Laminated Composite, Functionally Graded and Fuzzy Fiber...

Active Vibration Control of Flexible Rotors with Electromagnetic Actuator

Development and Validation of Soft Computing Based Models for Pulsed Gas...

Effect of Stress-Softening on the Dynamics of Rubber Strings

Gait Generation of Dynamically Balanced Biped Robots Using Soft Computing

Improvement in the Machinability of Ti-6al-4v Titanium Alloy by High Pressure Cooling

Microstructural and Tribological Study of Nanostructured and Conventional Thermally Sprayed Ceramic Coatings

Modeling and Multi-Objective Optimization in Wire Electro-Discharge Machining of Composite Materials

Unknown Input State Estimators for Component Fault Detection and Isolation of Lumped Parameter Systems

Theoretical Studies of Electrokinetic Transport and Separation in Nanofluidic Channels

Nonlinear Analysis of Smart Isotropic and Orthotropic Functionally Graded Plates Using 1-3 Piezoelectric Composites

Performance of Vertically/Obliquely Reinforced 1-3 Piezoelectric Composites...

Studies on Modeling of Bead Geometric Parameters in Welding...

Theoretical Studies on Pneumatic and Whirl Instability of Externally Pressurized Porous Gas Bearings Considering Velocity Slip

On the Mechanics of Thread Rolling

Effect of Pulsation and Swirl on Pulverized Coal Combustion

Effect of Non-Newtonian Lubricant on Stability of Journal Bearings

Analysis of FRP Laminated Composites with Internal Flaws

Fluid Flow and Heat Transfer by Slot Jet Impingement on Triangular and Hexagonal Prisms

Studies on Influence of Fluid Density Variation and Non-Darcy Flow on Natural Convection in a Porous Box

Numerical Modelling of Fluid Flow and Heat Transfer During Czochralski Crystal Growth

Processing and Characterisation of Plasma Sprayed Ceramic Coatings on Steel Substrate

Analysis of Piezoelectric Fiber Reinforced Composite Materials for Distributed Actuators of Smart Composite Structures

Fluid Flow and Heat Transfer in Rod Cluster Sub-Channels

Experimental and Numerical Analyses of Bent Angle Modification and Three Dimensional Surface Generation by Laser Forming

Shape Optimization of Cementless Femoral Implant using Genetic Algorithms

Finite Element Modeling of Delamination During Drilling of Fibre Reinforced Plastic Composites

Fluid Flow and Conjugate Heat Transfer for a Combined Turbulent wall Jet and Offset Jet

Entrainment of Air into an Infrared Suppression Device

Locomotive Wheel Failure from Excessive Wheel Gauge Change

Fluid Flowand Conjugate Heat Transfer in a Turbulent Slot Impinging Jet

Dynamical Aspects of Water Transport in Nanofluidic Channels

A Study on the Effect of Surface Roughness on the Temperature Rise at the Contact between Sliding Bodies

Some Studies on Underwater Shielded Metal ARC Welding

Vibration of Turbine Blades

Combustion Studies in a Cold Blast Cupola

Some Heat Transfer and Thermodynamic studies of combined Cycle Power Generation

Modeling and Diagnosis of Rolling Element Bearing Faults in Special Operating Conditions

Some Studies On Zircon Sands for Foundry Applications

Interfacial Dynamics of Thin Liquid-Films in Free-Surface Flows

Heat and Mass Transfer Studies on Adsorbed Natural Gas Storage Systems

Multi-Sensor Based Tool Condition Monitoring in Drilling of Glass Fibre Reinforced Plastic

Active Constrained Layer Damping of Geometrically Nonlinear Vibrations of Smart Laminated...

Multisensor Measurements and Data Fusion in Inverse Heat Transfer and Multiphase Flow

An Investigation on Water-Jet Assisted Underwater Laser Cutting Process

On Damping of Thin Cantilevers

Burnout Time in Fluidized Coal Bed Combustion

Electrokinetics Over Charge Modulated Surfaces

Effects of Friction on Vibration of Gear Transmission Systems

Natural and Mixed Convection Heat Transfer from Spheres and Vertical Cylinders

Electrically Modulated Wetting and Dynamics of Sessile Liquid Drops

Steady State and Dynamic Modeling of an Automotive Air Conditioning System under Healthy and Faulty Conditions

On the Contact Problem of an Inflated Spherical Nonlinear Membrane

Untitled

Effect of Water-Jet on Quality Improvement of Various Laser Material Processing Modalities

Some Studies on Distortion in Welding

Simulation Studies on Formation of Nitric Oxide inside the Cylinder with Gasoline and Gasoline-Water Mixtures

Hydrodynamics of Swirl Spray Pressure Atomizers and Thermal-dynamics of Gas Turbine Combustion

Structured Approach to Stochastical System Dynamics

Static and Fatigue Analyses of Fillet and Butt Welded Joints with Undercut Defects

Heat Transfer from Rotating Short Radial Blades

Performancean Alysis and Optimization of Individual Fins and Fin Assemblies

Computer Aided Analysis of Some Axisymmetric Simple and Compound Extrusion Problems

Effect of Specimen Geometry on Plastic Zone Size

Contact Stresses and Wear Characteristics of Total Artificial Hip Joint Using Polymeric and Composite Acetabular Cups

Transcritical Carbon Dioxide Heat Pumps for Simultaneous Cooling and Heating

Analysis of Stresses and Deformations in Beams of Composites

Combined Heat Transfer and Mass Transfer in a Sorbent Sphere

Study on the Performance and Emission Characteristics of Spark Ignition Engine Using Gasoline/Ethanol Blends with Surge Chamber

Some Studies on Synthesis and Characterisation of In-situ Al-TiC Metal Matrix Composites

Vision Based Monitoring and Feedback Control Systems for ARC Welding Process

Study of Some Aspects of Machinability

Gauge Widening Failure of Tread-Braked Passenger Coach Wheel Sets: Finite Element Modeling and Field Observations

Multicomponent In-Situ And Ex-Situ Laser Coatings on Ti-6al-4v and Al Substrates...

Real-World Chaotic Systems Using Computational Intelligence Approach

Finite Element Modeling and Experimental Investigation of Arc Welding

Torsional Vibration Model and Motor Current Signal Based Fault Detection Technique for Multi-Stage Helical Gearbox

On Nucleation and Growth of HFCVD Diamond Coating on Cemented Carbide Inserts and its Performance in Machining

Studies on Squeeze Film Stabilization of Rotor-Bearing Systems Using Newtonian and Viscoelastic Lubricants

Studies on Some Aspects of Electro-Discharge Machining

Theoretical Md experimental investigations on cyclone separator

Parameter identification in multidegree vibrating systems

Dynamics of pneumatic conveying

Numerical Studies on the Dynamics of Complex Fluids in Narrow Confinements

Natural Convection Heat Transfer from Horizontal and Vertical Cylinder with Annular Fins

Investigations into the Movement of Materials on Vibratory Spiral Elevator

Design of Optimum Support Characteristic for Rotor Shaft Systems

Studies on Hourly and Daily Cumulative Frequency Distributions for Ambient Temperature,Clearness...

Effect of Solids on Centrifugal Pump Characteristics

Some Studies on Material Removal Rate in Abrasive Jet Machining

Inverse Acoustical Characterization of Jute Materials and their Application in Microperforated Based Multilayer Sound Absorbers

Fluid Flow and Heat Transfer from Bluff Bodies of Various Shapes Placed Inside a Wind Tunnel

Development and Performance of Brazed Type Monolayer cBN Wheel

Modelling and Simulation of Centreless Grinding of Antifriction Bearing Elements

Stability of Rotor-Bearing Systems under Non-Potential Forces : a New Perspective

Studies on Dynamics and Control of Flexible Rotors Supported with Active Magnetic Bearings

The Influence of Mechanical, Thermal and Surface Properties on the Friction and Wear of Polymers - Experiments and Analysis.

Studies on Optimal Tolerances and Process Variabilities

Dynamic Characteristics of Aerostatic Rectangular Thrust Bearings

Analysis of Externally Pressurized Oil-Lubricated Multirecess Annular Thrust Bearings

A Hybrid Computational Intelligent Systems Approach for Modelling, Control and Optimization of Large Scale Industrial Processes

Damping at Preloaded Metallic Interfaces Subjected to Cyclic Tangential Loads

Heat Transfer By Impinging Jets

Development and Machining Performance of Titanium Nitride-Tungsten Disulphide Composite Coating Using Pulsed...

Development and Performance Evaluation of CVD Diamond Coated Carbide Tools

Dynamic Analysis of a Rotor System for Detection of Crack and Coupling Misalignment

On Improvement in Machinability of Hss Drills by Chisel Edge Modification

Static Load Sharing by Tooth Pairs in Involute Internal‐External Gear Set‐ with specific reference to Strain Wave Gearing

Bone Ingrowth and Remodelling Around Porous Coated Acetabular Prosthesis:a Mechanobiology Based Finite Element Analysis

Some Thermodynamic and Experimental Studies Related to Clean Coal Technology

Some Aspects of Phase Change Modeling Materials Processing

Studies on Some Aspects of Electrochemical Grinding

Accommodation and Force Control in Tracking and Manipulation through Virtual Dissipative Degrees of Freedom

Studies on Strategies for Online Learning for Averting Crisis in Vehicles

Coupled Displacement Field Finite Element Models for Laminated Composite Structures

Design, Development and Performance Studies on an Improved Virtual Impactor Type Aerosol Generation System

Experimental and Numerical Studies on Laser Transformation Hardening

Experimental and Theoretical Studies on Ion-Exchanged X-Zeolites as Catalysts for SI Engine Emission Control

Electrohydrodynamic Mass Transfer of Electrolytes in Poiseuille Passages

Robust 3-D Shape Extraction by Integrating Photometric and Motion Stereos through Modular Neural Networks

Dense Granular Flow through Silos Closed Channels and Open Channels

Friction Stir Welding and Deep Drawing of Aluminum Tailored Blanks for Light Weight Automotive Applications

Fluid Mechanics and Performance Optimization of Tesla Disc Turbines

Experimental Investigation on Air Entrainment by Plunging Liquid Jets and its Application in Hydraulic Air Compressor

Analysis and Performance Studies of some Equipment with Combined Sensible and Latent Heat Transfer

Studies on Orbital Rotory Piston ‘Lsht’ Hydrostatic Motor Low Speed Performance and Design

Effect of Fluid Inertia on Stability of Fluid Film Bearings

Analysis of Stresses and Deformations in Nuclear Fuel Pellets

Some Studies with Limestone and Laterite in a Rotary Kiln

Study of Static and Dynamic Characteristics of Sandwich Beams Under Various Boundary Conditions

On the Mechanics of Axisymmetric Extrusion-Forging

Property Improvement of Thermally Sprayed Coatings Using Carbon Nanotube Reinforcement

Development of Arc Rotation Mechanism and Experimental Studies on Pulsed GMA Welding with and without Arc Rotation

Transcritical Carbon Dioxide Heat Pumps: Studies on Multistaging and Capillary Tube Systems

Analysis of Rough Surface Hydrodynamic Bearings using Stochastic Finite Element Method

Studies on Natural Convection During Melting and Solidification of Metals and Alloys

Some Studies of Radial Extrusion

Some Stability Problems in Hydrodynamics and Hydromagnetics

Studies on Simulated HAZ Conditions in a Structural Steel

Computer Aided Analysis of Hydraulic Press Structures

Fluid Flow and Heat Transfer by Slot Jet Impingement on Square and Rectangular Cylinders

Analysis of Externally Pressurized Two-Layered Porous Journal Bearings

Bond Graph Based Analysis of Dynamic Systems Through Substructuring

Novel Twin Tool Based Friction Stir Welding of Aluminium Alloys

Dynamics of Rotor Bearing Systems as Influenced by Dilute Viscoelastic Lubricants

Bondgraph Modelling of Thermometallurgical Process in a Runout Table

Some Studies on the Parametric Instability of Asymmetric as Well as Symmetric Sandwich Beam Configurations

Solutions of Vibration Problems of Rods and Beams Using Refined Theories

Grindability of Plasma Sprayed Ceramic Coatings

Electrorheologically-modulated Flows of Complex Fluids in Narrow Confinements

Parametric Instability of Sandwich Beams

Neuro Dynamic Control of a Multi Degree of Freedom Inverted Pendulum with Relevance to Bipedal Walking

Studies on Solar Radiation and Ambient Temperature Distributions and Monthly Average Utilizability

Numerical Modeling and Validation of Friction Stir Welding with Different Tool Configurations

Numerical and Experimental Studies on Crossflow Plate-Fin Heat Exchangers

Dynamics, Control, and Optimal Motion Planning of Autonomous Underwater Vehicles

Studies on Electron Beam Welding of Cu-Cr-Zr Alloy Plates and Spiking Phenomenon in Etp Copper Weldment

Machining System Optimization for Multiple Spindle Automatic Lathe

On the Dynamics of Lubricated Ball Bearings

Studies on a Pressure Relief Valve with a Proportional Solenoid-Controlled Pilot Stage

Theoretical and Experimental Studies on the Dynamics and Control of Intelligent Beam Structures

Thermo-Fluid Modeling of Pulverized Coal Combustion and Numerical Predictions of Raceway Shape in a Blast Furnace

Mixing and Free Surface Flow in Steelmaking Devices

Adhesion Failure and Delamination Damage Analyses of Bonded Joints in Laminated FRP Composites

Dynamics and Robust Control of Robotic Systems : A Bond Graph Approach

Development of Computational Algorithms for Dispersed Two Phase Flow and Flow with Complex Interfaces

Modeling of Swirl Nozzles: Investigations of Air Core Formation and Performance Parameters

Applications of Artificial Neural Networks, Regression Analysis and Genetic Algorithms in Metal Casting

Geometrically Nonlinear Analysis of Smart Laminated Composite Structures...

Application of Statistical Methods and Fuzzy Logic Techniques to Predict Bead Geometry in Welding

Investigations on External and Internal Hydraulic Jumps